Operating instructions

WAGO-Software KNX/EIB/TP1 Module / KNX IP Controller Parameterization 25
WAGO ETS Plug-in
Manual
2.0.0
Table 9: “File” menu item
Menu Item
Description
Import
Use the following submenu items to import a configuration.
XML (Restore)
Import as an XML file. This is not a SYM_XML file.
CSV
Export as a CSV file. The imported .csv file must have been
previously exported and, if necessary, edited with Excel or a
text editor. This enables you to change group address
associations and other properties of network variables.
However, name, data type (DPT) and CO number cannot be
changed.
CSV file does not contain a fully specified
configuration!
Unlike an exported XML file, the CSV file does
not contain a fully specified configuration. It is
therefore not suitable for:
• transferring the configuration to a different
device
• reimporting after a manual change of the ETS
visibility of variables
• reimporting after an XML or SYM_XML import.
Print...
Prints the current configuration.
Two different documentation types can be selected:
• “Based on group addresses”
• “Based on network variables”.
Print preview…
Displays the print preview. The same two documentation
types can be selected (see “Print…” menu item).
Exit…
Closes the Plug-in. If the modifications have not been saved,
the software will provide a prompt with the option to save the
changes.
4.1.1.1.1 Exporting a Configuration as an XML File (Backup)
1. In the main menu choose File > Export > XML (Backup).
2. Enter a storage location in the opened dialog.
3. Left-click [Save] to save the configuration and close the dialog.
Routinely save the configurations!
It is recommended that the configurations are regularly exported to create a
backup file.