Operating instructions

WAGO-Software KNX/EIB/TP1 Module / KNX IP Controller Parameterization 27
WAGO ETS Plug-in
Manual
2.0.0
4.1.1.1.4 Importing a CSV File
CSV files do not contain a fully specified configuration!
Unlike an exported XML file, the CSV file does not contain a fully specified
configuration. It is therefore not suitable for:
• transferring the configuration to a different device
• reimporting after a manual change of the ETS visibility of variables
• reimporting after an XML or SYM_XML import.
1. In the main menu, choose File > Import > CSV.
2. In the dialog that opens, search for the CSV file required.
3. Left-click [Open] to import the file and close the dialog.
4. A warning prompt indicates that importing a configuration will overwrite all
existing settings and assignments. If you agree, click the [Yes] button.
4.1.1.2 “View” Menu Item
Figure 13: “View” menu item
Table 10: “View” menu item
Menu Item
Description
Show toolbar
When checked, displays the toolbar. The toolbar
is otherwise hidden.
Show properties
When checked, the “Properties” tab is displayed
on the right in the window. It is otherwise
hidden.
Show short names
The network variable names are displayed in
short form, e.g., “FbDPT_Switch” instead of
“PLC_PRG.M2_001_FbDPT_Switch”.
Selecting the Show Short Name option displays the network variable names in
abbreviated form — both in the Plug-in window, as well as with the
communication objects in the ETS user interface.
The short name omits the following:
• the preceding program name, including the separator
• the prefix for identifying the KNX Module and index of the DPT function
block