Operating instructions

WAGO-Software KNX/EIB/TP1 Module / KNX IP Controller Parameterization 29
WAGO ETS Plug-in
Manual
2.0.0
Table 13: “Options” menu item
Menu Item
Description
IP parameters…
*)
This opens the “IP Controller” dialog to set the IP
parameters for the controller.
*)
Options…
This opens the “Options” dialog to enter settings
for functions such as telegram delay and automatic
save.
*)
only when configuring controllers
The Options… menu item opens the “Options” dialog.
The “Options” dialog consists of 3 tabs:
• Parameters
• CODESYS
• Autosave
4.1.1.4.1 Defining the Telegram Delay after Reset
Use the “Parameters” tab to define the telegram delay after a reset.
This is the smallest interval that must be observed between successive telegrams.
0, 50, 100, 250 and 500 milliseconds [ms] can be selected.
Figure 16: “Options” dialog – “Parameters” tab
4.1.1.4.2 Finding the File Path to WAGO-I/O-PRO
In the “CODESYS” tab, enter the file path of the .exe file for the WAGO-I/O-
PRO (CODESYS) software.