Operating instructions

30 KNX/EIB/TP1 Module / KNX IP Controller Parameterization WAGO-Software
WAGO ETS Plug-in
Manual
2.0.0
Figure 17: “Options” dialog – “CODESYS” tab
4.1.1.4.3 Setting the Autosave Function
Use the “Autosave” tab to define automatic save for the current configuration. For
this, the Enable automatic save of the configuration checkbox must be checked.
Enter a number that defines the save interval in minutes.
“Autosave” function saves changes in the database!
The “Autosave” function is identical to the normal “Save” function and saves
changes in the ETS database.
An XML file is not saved (as is the case with File > Export > XML (Backup)).
Figure 18: “Options” dialog – “Autosave” tab
4.1.1.4.4 Setting IP Parameters
The IP Parameters… menu item is only displayed when configuring the
controller. This opens the “IP Controller” dialog: