Operating instructions

32 KNX/EIB/TP1 Module / KNX IP Controller Parameterization WAGO-Software
WAGO ETS Plug-in
Manual
2.0.0
4.1.2 Toolbar
The toolbar provides fast and convenient access to frequently used functions of
the main menu.
Figure 21: Toolbar
Table 15: Toolbar
Button
Action
Imports an SYM_XML file, similar to selection of the SYM_XML
file.
Saves the settings to the ETS. The SYM_XML file is not changed.
Prints the current configuration.
Shows or hides the “Properties” tab.
Opens the “Options” dialog.
Opens the “IP Parameters” dialog.
*)
Exports the current configuration as an XML file (not a
SYM_XML file).
Imports a configuration as an XML file (not a SYM_XML file).
Activates online help.
*)
only when configuring controllers
4.1.3 “Network Variables” Tab – List of Network Variables
A “List of network variables” is located in the middle of the “Network Variables”
tab. This lists all the network variables available that you can associate with group
addresses from the ETS. These network variables each have a specific data point
type by which they can be filtered (see Section “'Network Variables' tab –
Datatypes”).
Observe naming conventions of network variables!
Observe the syntax conventions for network variable names, which are described
in detail in the Section “ETS” > … > “Syntax of Network Variable Names.”
The following properties are listed in the “List of network variables” table: