Operating instructions

40 KNX/EIB/TP1 Module / KNX IP Controller Parameterization WAGO-Software
WAGO ETS Plug-in
Manual
2.0.0
Alternatively, you can also create the association via the context menu of the
relevant communication object (Link with…). This opens the “Link Device
Objects” dialog.
Figure 29: “Link Device Objects” dialog > “Group address selector”
This dialog enables you to select the required target group address from a list of
available group addresses and create the link, or directly create a new group
address that is immediately linked with the network variable.
Group addresses that are already available cannot be created!
If the “Create new group address” option is selected and you enter a preexisting
group address, the message “Group address already exists” is displayed. An
identical group address cannot be created.
4.2.2 Error Messages
Errors occurring as a result of the multiple assignment of network variables to
group addresses are indicated with popup windows. These popup windows
contain the group address used and show possible causes of the error.