Operating instructions

46 KNXnet/IP Router Parameterization WAGO-Software
WAGO ETS Plug-in
Manual
2.0.0
5.2.2 Bus

IP Settings
This dialog sets the parameters for the filtering and confirmation of telegrams sent
from the bus to the IP medium.
Figure 33: “Bus  IP” dialog
5.2.2.1 Group Telegrams for the Main Groups 0 to 13
In this selection box, you set the filtering of telegrams for the main groups 0 to 13:
• route: All telegrams are routed.
• lock: No telegram is routed.
• filter (normal): Filtering is performed according to the filter table.
5.2.2.2 Group Telegrams of Main Groups 14 and 15
In this selection box, you set the filtering of telegrams for the main groups 14 to
15:
• route: All telegrams are routed.
• lock: No telegram is routed.
5.2.2.3 Physically Addressed and Broadcast Telegrams
This selection box sets filtering for the physically addressed telegrams and
broadcast telegrams:
• route: All telegrams are routed.