Operating instructions

48 KNXnet/IP Router Parameterization WAGO-Software
WAGO ETS Plug-in
Manual
2.0.0
5.2.3.2 Group Telegrams for the Main Groups 14 and 15
In this selection box, you set the filtering of telegrams for the main groups 14 to
15:
• lock: No telegram is routed.
• route: All telegrams are routed.
5.2.3.3 Physically Addressed and Broadcast Telegrams
In this selection box, you set the filtering of physically addressed and broadcast
telegrams:
• route: All telegrams are routed.
• lock: No telegram is routed.
• filter (normal): Filtering is performed according to the filter table.
5.2.4 IP Address Assignment for the KNXnet/IP Router
The KNX IP Controller needs an IP address to be integrated correctly in the
network. In combination with the subnet mask, the IP address uniquely defines the
device in the network.
Figure 35: KNXnet/IP parameters of the KNXnet/IP Router
There are three ways of assigning an IP address to the KNXnet/P Router: