Installation & Assembly

ASSEMBLY INSTRUCTIONS

Read instruction carefully prior to assembly

Thank you for purchasing this quality product. Check carefully for small parts which may

come loose during shipment. Remove all components from pack and place top down on soft

surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts

as specified below.

PACKAGE CONTENTS

Part

Description

Quantity

Short Strand

Medium Strand

Long Strand

Longest Strand

Canopy

Mounting Bracket (preassembled

to Canopy (E))

Screw collar (preassembled to

Canopy (E))

It is recommended to use two or more persons during the assembly process.

1. Unscrew screw collar (G) and detach mounting bracket (F) from canopy (E). Attach

mounting bracket (F) to the junction box (not included) with two junction box screws

(AA).

2. Make electrical connections using wire connectors (BB)

3. Place canopy (E) against the mounting surface, allowing the preassembled screws on

mounting bracket ( F) to pass through canopy (E). Secure with previously removed screw

collar (G)

4. Attach longest crystals (D) to the screw collar (G). Next attach long crystals (C) to the

loops indicated on the figure at (c), then attach medium crystals (B) to the loops indicated

on the figure at (b). Last attach short crystals (A) to the loops indicated on the figure at

(a).

5: Install light bulbs (not included).This fixture has been rated for up to

Three (3) E12 Socket 60-Watt Maximum Candelabra Light Bulbs (not included)

or CFL Equivalent light bulbs (not included) or LED Equivalent bulbs (not included).

6. Restore Electrical power when complete.

CAUTION! IMPORTANT SAFETY INSTRUCTIONS:

Connect the cord with the ribbed surface to the white wire of the supply circuit.

Connect the half with the markings and smooth surface to the black wire of the supply

circuit.

Connect the bare copper grounding wire from the fixture to the green screw on the

mounting bracket and the grounding conductor of the supply circuit. Use U.L/CSA Listed

wire connectors suitable for the size, type and number of conductors. No loose strands or

loose connections should be present.