User Manual

BLUmaxx Connect/Disconnect

NOTE:The BLUmaxx Mic can quickly connect or disconnect

without disconnecting a call.

To Connect

1.The plug on the BLUmaxx Mic

is designed to connect to the headset only

one way. Do not force the plug into the

jack. It will connect easily.

2.When the BLUmaxx Mic is connected

correctly, the opening at the tip of the

microphone is closest to the mouth and

the opening at the middle of the mic tip

faces away from the mouth.

To Disconnect

1.Grasp the connector and gently remove

the BLUmaxx Mic.

2.Keep the BLUmaxx Mic in the storage

case for easy access.

Noise-canceling microphone

Connector

Hold here to connect/disconnect

Insertion

Important: Sound quality and noise

isolation depend on a good eartip seal.

• Carefully insert the earpiece

while pulling up and out on the

back of the ear.

• Twist the earpiece while inserting

until outside noise is blocked out.

• Position the earpiece for best fit and comfort.

•

Flanged eartip: Moistening eases insertion.

•

Foam eartip: Roll down or compress foam eartip before

inserting. Hold the eartip in place for about 5 seconds while

the foam expands to create a tight seal in the ear canal.

Removal

To avoid discomfort, remove the headset slowly with a twisting

motion to gradually break the seal.Open jaw slightly to equalize

pressure,because suction can occur when the eartip is removed.

For a video on proper

earphone insertion go to