Owner manual

Manual EKS ActiveX
®
Module Ethernet TCP/IP
3.5 Properties
3.5.1 Port
 Description Selects the port for the TCP connection
 Syntax object.Port = String Value;
 Comments Possible values are:
2444
2445
…
This property is applied by calling the method Open. The value must match the setting
on the EKS.
 Data type String
 Default value 2444
3.5.2 IPAddress
 Description Selects the IP address for the TCP connection
 Syntax object.IPAddress = String Value;
 Comments Possible values are:
192.168.1.1
…
This property is applied by calling the method Open. The value must match the setting
on the EKS.
 Data type String
 Default value 192.168.1.1
3.5.3 KeyType
 Description Defines the type of Electronic-Key used (read-only Electronic-Key* or read/write
Electronic-Key)
*Earlier transponder type. We do not recommend using this transponder type in new installations.
 Syntax object.KeyType = KeyTypeConstants Value;
 Comments Possible values are:
EKS_KEY_READWRITE = 1
EKS_KEY_READONLY = 8
This property is applied by calling the method Open.
 Data type KeyTypeConstants (Enumeration)
 Default value EKS_KEY_READWRITE
Page 10/20 Subject to technical modifications 102030-02-10/12