Quick Start Guide

10
English English
11
STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill pilot holes. Use
the provided screws to secure the Mounting Bracket on the wall, the Screw Hole Positioning
Card indicates the position of the screw holes.
What is required: screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Pack
Phillips-Head Screwdriver
(User provides it.)
Wall
Wall
Mounting
Bracket
Mounting
Wedge
Mounting
Bracket
Mounting Bracket
(Attached to 15° Mounting
Wedge)
15° Mounting
Wedge (Optional)
Screw Packs (Spare screws
and anchors are included.)
Without 15° Mounting Wedge With 15° Mounting Wedge
Mount the Doorbell on Surfaces Made Out of Hard Materials
1. If you’re mounting the doorbell on a surface made out of hard materials, like brick, concrete,
stucco, drill 2 holes through the Screw Hole Positioning Card with a 15/64”(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to secure the Mounting
Bracket on the wall.
What is required: Power Drill, 15/64”(6 mm) Drill Bit, Mounting Bracket, 15° Mounting
Wedge (Optional), Screw Pack
Power Drill with
1/4" (6.35mm) Drill Bit
(User provides it.)
15/64”(6 mm) Drill Bit
Mounting Bracket
(Attached to 15° Mounting
Wedge)
15° Mounting
Wedge (Optional)
Screw Packs (Spare screws
and anchors are included.)
1