User's Manual

01 02 03 04 05 06 07 08
USER MANUAL
Video Baby Monitor 720P
WHAT’S IN THE BOX
Welcome Card
Welcome Card
Welcome Card
Welcome Card
Video Baby Monitor 720P
Model: T8321-C
FCC ID:2AOKB-T8321C
IC:23451-T8321C
Monitor Micro-USB
Power Cable (1 m)
Monitor Adapter (5V
2A)
Welcome Card
Video Baby Monitor 720P
Model: T8321-M
FCC ID:2AOKB-T8321M
IC:23451-T8321M
Camera Micro-
USB Power Cable
(3 m)
Mounting Screws
Wall Mount
Camera Adapter
(5V 1A)
User Manual
Note: Power adapter varies by region.
FEATURE INTRODUCTION
Monitor Features
1 2
4
3
5
6
7
8
9
10
11
12
13
1
Screen
6
LED indicator
2
Menu button • Red: charging
• White: Fully charged
3
Navigation button
4
OK button
7
Micro USB charging port
• Press to confirm the selection
• Press to switch camera display if more
than 2 cameras added
8
Volume down
9
Volume up
10
Power button
5
Return to previous level of menu / Talk
button
11
Zoom button
• Press and hold to speak to the camera
• When menu is opened, press to return
to the previous level of menu
12
Reset
13
Speaker
Camera Features
1
2
3
4
5
6
7
1
Microphone
5
Pairing button
2
Standard camera lens
6
Micro USB port
3
LED indicator
7
Speaker
4
Temperature sensor
SETTING UP THE CAMERA AND MONITOR
Charge the Monitor
Fully charge the monitor before use. To charge:
1. Connect one end of the micro USB cable to the baby monitor, and the other end to the power
adapter (5V/2A).
2. Plug the adapter into a power outlet.
3. Press and hold the power button for 2 seconds to turn the baby monitor on.
5V/2A
Charge the Camera
1. Connect one end of the micro USB cable to the baby camera, and the other end to the power
adapter (5V 1A).
2. Plug the power adapter into a power outlet.
5V/1A
The new baby monitor and camera will set up automatically. You are all set to use the products after
the monitor and camera are fully charged.
ADDING A NEW BABY CAMERA TO THE
BABY MONITOR
The baby camera and baby monitor are paired and ready to use right out of the box. Refer to the
following steps when adding extra baby cameras or after resetting a baby camera.
1. Enter menu settings, go to Camera

Add Camera, then follow the onscreen instructions
to start the pairing.
Add Camera
Delete Camera
Cycle Cameras
Camera Settings
60 Secs
Scanning for new camera
Push the button on the
camera to pair.
1Secs
4
23
o
c
06 12 AM
:
2. Press and hold the pairing button on the rear of the camera for 1 second until a notication
prompt is heard.
3. Check the rmware version of the monitor (see image below) to make sure your baby monitor
and camera are running the same, latest rmware version.
Language
Anti-Screen Flicker
Default Settings
Temperature Unit
Sleep Mode
Connect with Us
Night Vision Mode
Time Set
4
06 12 AM
:
Monitor: v x.x.x
Camera: v x.x.x
SN: T8300E0A18370E72
https://www.eufylife.com
United States [phone]
United Kingdom [phone]
Germany [phone]
Japan [phone]
[e-mail]
To check whether it is the latest version:
1
Visit the website below:
https://www.eufylife.com/support/5505/spaceview-baby-monitor
2
If the rmware version is lower than the version shown online (highlighted in green), click the
firmware version to download. The downloaded file includes firmware for both T8300 and
T8321 models, make sure you use the T8321 rmware.
3
Follow the steps in the “eufy Security Software Upgrade Guide” video or Firmware
Upgrade Manual to complete rmware upgrade.
Note:
●
The eufy Security Spaceview baby camera can be added to the monitor. Before adding
the camera, make sure SpaceView baby camera is running the same, latest version
with the monitor’s.
• Chrome OS is not supported for rmware upgrade.
• Before you upgrade rmware, use the provided micro USB cable (1m) to connect the
device needed to your computer.
USING THE BABY MONITOR
When more than 2 cameras are added to the monitor, you can manually switch among cameras by
pressing the monitor’s OK button. Once the camera switch is completed, the icon of the selected
camera will appear on the corner of the baby monitor.
You can also select the “Cycle Camera” option. The screen cycles through the list of connected
baby cameras according to the preset intervals.
Note: The monitor will emit a loud noise if placed too close to the camera. This is normal and is
resolved once the camera is moved away from the monitor.
MOUNTING THE BABY CAMERA ON THE
WALL
1. Place the wall mount against the wall, matching the direction as UP indicates. Mark the screw
holes with a pencil.
UP
2. Drill
5
1
'' holes into the wall and then insert anchors into the holes. Anchors are not needed for
wooden walls.
3. Insert the screws through the mounting holes of the wall mount and screw into the anchors.
UP
4. Snap the baby camera onto the wall mount.
UP