User's Manual

06 English English 07
Charge the Camera
1. Connect one end of the micro USB cable to the baby camera, and the
other end to the power adapter (5V 1A).
2. Plug the power adapter into a power outlet.
5V/1A
The new baby monitor and camera will set up automatically. You are all set
to use the products after the monitor and camera are fully charged.
ADDING A NEW BABY CAMERA
TO THE BABY MONITOR
The baby camera and baby monitor are paired and ready to use right out
of the box. Refer to the following steps when adding extra baby cameras or
after resetting a baby camera.
1. Enter menu settings, go to Camera -> Add Camera, then follow the
onscreen instructions to start the pairing.
Add Camera
Delete Camera
Cycle Cameras
Camera Settings
60 Secs
Scanning for new camera
Push the button on the
camera to pair.
1Secs
4
23
o
c
06 12 AM
:
2. Press and hold the pairing button on the rear of the camera for 1
second until a notication prompt is heard.
3. Check the rmware version of the monitor (see image below) to
make sure your baby monitor and camera are running the same, latest
rmware version.
Language
Anti-Screen Flicker
Default Settings
Temperature Unit
Sleep Mode
Connect with Us
Night Vision Mode
Time Set
4
06 12 AM
:
Monitor: v x.x.x
Camera: v x.x.x
SN: T8300E0A18370E72
https://www.eufylife.com
United States [phone]
United Kingdom [phone]
Germany [phone]
Japan [phone]
[e-mail]