User's Manual

08 English English 09
To check whether it is the latest version:
1
Visit the website below:
https://www.eufylife.com/support/5505/spaceview-baby-monitor
2
If the firmware version is lower than the version shown online
(highlighted in green), click the firmware version to download. The
downloaded le includes rmware for both T8300 and T8321 models,
make sure you use the T8321 rmware.
3
Follow the steps in the “eufy Security Software Upgrade Guide”
video or Firmware Upgrade Manual to complete rmware upgrade.
Note:
The eufy Security Spaceview baby camera can be added to the
monitor. Before adding the camera, make sure SpaceView baby camera is
running the same, latest version (in the T8300 folder) with the monitor’s.
USING THE BABY MONITOR
When more than 2 cameras are added to the monitor, you can manually
switch among cameras by pressing the monitor’s OK button. Once the
camera switch is completed, the icon of the selected camera will appear on
the corner of the baby monitor .
You can also select the “Cycle Camera” option. The screen cycles through
the list of connected baby cameras according to the preset intervals.
Note:
The monitor will emit a loud noise if placed too close to the
camera. This is normal and is resolved once the camera is moved away
from the monitor.
MOUNTING THE BABY CAMERA
ON THE WALL
1. Place the wall mount against the wall, matching the direction as UP
indicates. Mark the screw holes with a pencil.
UP
2. Drill
5
1
'' holes into the wall and then insert anchors into the holes.
Anchors are not needed for wooden walls.