User's Manual

English English

Mount the Motion Sensor

There are two methods of mounting the motion sensor at the selected location:

• Use the 3M adhesive strip:

①

Snap the adjustable wall mount onto the motion sensor base.

②

Stick the adhesive strip on the back of the sensor, remove the lm, and stick

the motion sensor on the wall.

③

Rotate the motion sensor to adjust the detection coverage.

1 2

• Use the provided screws:

①

Place the mount against the wall and use a pencil to mark the desired

location for mounting.

②

Drill holes at each marking. No need to drill a pilot hole in the wooden walls.

③

Insert anchors into the holes, and fix the mount onto the wall with the

provided screws. No anchors are needed on wooden walls.

④

Clip the motion sensor back onto the mount.

⑤

Rotate the motion sensor to adjust the detection coverage.