User Guide

0201
Using Your RoboVac
EufyHome
EufyHome
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
a
b
c
d
e
f
Remove power cords and small objects from the floor that may entangle RoboVac. You can
use the supplied cable ties to organize your wires and power cords.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very
dark-colored high-pile rugs or rugs thicker than 1.02 in/26 mm as they may cause RoboVac to
malfunction.
Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac from getting
stuck. If necessary, place a physical barrier to block off the problem areas.
Keep RoboVac away from wet areas.
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these
objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep drops in most
cases. Sensors are less effective if dirty or used on carpeted/reflective/very dark-colored floors.
It is recommended to apply the Boundary Strip(s) to block off areas where RoboVac may fall.
To keep RoboVac away from any area or item you do not want RoboVac to clean, apply the
Boundary Strip(s) on the floor with adhesive tape to create a virtual barrier. Make sure the
strips are placed FLAT on the floor.
1
2
Place physical barriers or Boundary Strips in front of fireplaces and areas that may cause
damage to RoboVac if entered.
51005002015 V02
Quick Start Guide
Download the EufyHome app and follow
the instructions in the app to complete the
Wi-Fi connection. Then you can control
RoboVac via this app. Refer to the Owner’s
Manual for details.
Fully charge RoboVac before use.
The LED indicator on the button
breathes orange while charging, and
turns solid blue when fully charged.
- Always keep the Charging Base plugged in, otherwise
RoboVac will not automatically return.
- When the Charging Base connects to AC power, the
LED indicator on the Charging Base is SOLID WHITE.
Remove the sticker next
to the power switch, and
the foam blocks beside the
bumper before use.