S300 eufyCam Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
AT A GLANCE S300 eufyCam S380 HomeBase Model: T8161 Model: T8030 ① ② ⑤ ⑥ ③ ⑦ ④ ⑧ ④ ① ② ⑨ ⑤ ③ ⑥ ⑦ ⑧ ⑩ ① SYNC Button ⑥ Microphone ③ Photosensitive Sensor ⑧ Mounting Hole ② Camera Lens ④ Spotlight ⑤ LED Indicator 01 ⑦ Motion Sensor ⑨ USB-C Charging Port ⑩ Speaker ⑨ ① Status LED ② Reset Hole ③ Speaker ④ Hard Drive Bracket ⑤ SYNC / ALARM OFF Button ⑥ USB Port 1 ⑦ USB Port 2 ⑧ Ethernet Port ⑨ Power Port 02
EXPANDING STORAGE (OPTIONAL) S380 HomeBase comes with 16 GB of storage for saving video recordings and allows you to add an additional hard drive to expand the space. Install Your Hard Drive S380 HomeBase must be powered off when you install or remove a hard drive. 1. Push down the top lid to remove it. Prepare Your Hard Drive Your hard drive must meet the following requirements: Type Hard disk drive (HDD) or solid state drive (SSD) that uses the SATA interface Size 2.
3. Fix your hard drive to the bracket with the provided screws. SETTING UP 1. Power and connect S380 HomeBase to your router. The LED indicator will turn blue (This may take about 1 min) when S380 HomeBase is ready for setup. HARD DRIVE 4. Insert and screw the bracket back to S380 HomeBase, then put the top lid back into place. 2. Download and install the eufy Security app, then sign up for an account. • You can follow the steps above to expand the storage whenever necessary.
3. Follow on-screen instructions to add S380 HomeBase and the cameras to your device list(*). CHARGING THE CAMERA Fully charge both cameras before first use. This may take about 8 hours for each. USB Port 1 Option 1 5V USB Charger Option 2 LED Indicator Description Blue Charging OFF Fully charged * One S380 HomeBase can pair up to 16 cameras.
MOUNTING THE CAMERA Mount the Camera 1. Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it. Select a Location Select a location where you can get the desired view. We recommend hanging the camera 7-10 ft (2-3 m) above the ground. Camera Field-of-View Motion Detection Zone 7-10 ft (2 - 3 m) 2.
3. Firmly screw the knob of the mounting bracket into the mounting hole. 4. Hold and screw the camera to the mounting bracket. Rotate the camera to adjust the view and check it using the live stream, which you can access in the eufy Security app. SAFETY • Do not use the device in the environment at a too high or too low temperature, never expose the device to strong sunshine or too wet environment. • The suitable temperature for T8030 and accessories is -10°C to 45°C .
NOTICE NOTICE (United States of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
