Tabel of Content What’s in the Box 01 Feature Introduction 02 Setting Up the Camera and Monitor 03 Replacing the Camera lens 11 Safety 12 Customer service 15
What’s in the Box Feature Introduction Monitor Features: 1 Baby Monitor (T8300-C) Baby Camera (T8300-M) 2 3 4 7 5 6 Wall Mount 8 9 10 11 12 Monitor Micro-USB Power Cable (1.5 m) Monitor Adapter (5V 2A) Camera Micro-USB Power Cable (3 m) Mounting Screws Wide-Angle Lens Power adapter varies by region.
Setting Up the Camera and Monitor microSD memory card can only be used for firmware upgrade, it cannot be used to store video recordings. Monitor Installation Fully charge the monitor before use. To charge: Connect the baby monitor to the monitor adapter with the Micro USB cable, and then connect the adapter to a power outlet. Connect the other end of the baby monitor’s Micro USB power cable to the Micro USB port in the monitor to charge it.
Press and hold the power button to power on the monitor. Press the menu button to open Menu Settings. Time Set the time on the monitor. Zoom Set the zoom level. Off / 1.5x / 2x Add Camera Note: You can add up to 4 cameras per baby monitor. 1 Camera Monitor Menu Settings Menu Options Description Set the brightness of the Use the navigation screen. buttons to adjust the brightness level Sleep Mode Select to turn off the Off / 1 min / 3 min screen after 1 min, 3 min, / 5 min or 5 min.
Replacing the Camera lens Lens type Usage Standard camera This lens is recommended for general viewing; infants are clearly seen within a 2~3m range. lens (default lens) Safety Warning Lens Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. This product complies with the radio interference requirements of the European Community.
disconnect device of adapter. If you use a third-party charger, the recommended outputvoltage/current of the adaptor is 5Vdc/2A,and the adapter shall be CE approval type. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
