Table of Contents 02 Important Safety Instructions 06 About Your Robocall What's in the Box Robocall Anatomy Buttons & Indicators 10 Using Your Robocall Important Tips Before Use Preparation Charge Your Robocall Use Your Robocall with the Homeroom App Start / Stop Cleaning Select a Cleaning Mode Use the Boundary Strip Use Your Robocall with Amazon Alexei / the Google Assistant 22 (Cleaning and Maintenance Clean the Dust Collector and Filters Clean the Rolling Brush Clean the Side Brushes Replace the Side Br
Important Safety Instructions To reduce the risk of injury or damage, read these safety instructions carefully and keep them at hand when setting up, using, and maintaining this device. WARNING SYMBOLS USED This is the safety alert symbol. This symbol alerts you to potential hazards that could result in property damage and/or serious bodily harm or death.
« Do not use this device on an unfinished, unsealed, waxed or rough floor. It may result in damage to the floor and this device. Use only on hard floor surfaces or low-pile carpet. « This device has been designed to be used on floors without scratching them. We still recommend that you test this device on a small area of the room to be cleaned to ensure no scratches are made before cleaning the whole room.
About Your Robocall What's in the Box Robocall Power Adapter == Additional High-Performance Filter Boundary Strips 6.
Dust Collector Pr-filter g High-performance fighter Foam filter Suction Inlet Dust collector Suction inlet Charging Base Status light Charging contact pins Power cord storage compartment Power casket 08 Remote Control Return Robocall to Charging Base Adjust suction power level in Auto and Quick Cleaning modes Start Auto cleaning / Stop cleaning Control cleaning direction manually Start Auto cleaning Start Edge cleaning d8 5 d PPy Start Spot cleaning Start Quick cleaning Install 2 AAA batteries before using
hen you use the Find My Robot function via the Homeroom app al thees LED indicators Lash bite and Robocall hips once.
Method 1: Attach Robocall to the Charging Base by aligning its charging pins with the o Place the Charging Base on a hard, level surface and against a wall. charging pins on the base. o Remove objects within 3 ft/1 m of the left and right side and within 6 ft/2 m of the front of the Charging Base. Method 2: Press ¥ an Robocall or on the cremate control o return Robocall to the Charging Base.
» Robocall is attached to the Charging Base to ensure it has enough power during setup. £ Download on the Google Play R 1. Download the Homeroom app from the App Store (iOS devices) or Google Play (Android devices). 2. Open the app and create a user account. 3 Tap the icon in the top right corner to add Robe Vac to your Homeroom account. 4, Follow the instructions in the app to set up the WI-Fi connection. After connecting successfully, you can control Robocall via the app.
1. Auto cleaning Acrobat optimizes its cleaning path by selecting different cleaning modes automatically until cleaning is complete. This is the most commonly used cleaning mode. Press /@ on Robocall the remote control to start cleaning in Auto Mode. Rorschach wil return fa the Charging Base automatically when the battery Revel became ooV fishes e, ~ By default Robotic starts in Av to cleaning mode when t i fumed on.
4. Quick leaning Acrobat will automatically stop cleaning after 30 minutes and return to the Charging Base in this mode. If any small room or area needs to be cleaned, it is recommended to select this mode to save time and power. Press 36 on the remote control to start quick cleaning mode. 5. Manual cleaning You can direct Robocall to clean a particular area by using the directional buttons on the remote control.
Before you start, make sure that: » Robocall is attached to the Charging Base to ensure there is enough power. » Robocall is connected with the Homeroom app. « You have an Alexei-enabled device (i.e. puffy Genie, Amazon Echo, Echo Dot and Amazon Tap, Echo Show, Echo Spot) or a device enabled with the Google Assistant (i.e. Google Home, Google Home Mini). These devices are sold separately. » The Amazon Alexei app or Google Home app is already installed on your smart device, and you have created an account.
Cleaning and Maintenance For optimal performance, follow the instructions below to clean and maintain Robocall regularly. The cleaning/replacement frequency will depend on your usage habits of Robocall.
© Press down to snap the brush guard into place. Clean the Side Brushes Foreign substances, such as hair, can easily get tangled in the side brushes, and dirt may adhere to them. Be sure to clean them regularly. € Remove the side brushes. © Carefully unwind and pull off any hair or string that is wrapped between the main unit and the side brushes. o Use a cloth dampened with warm water to remove dust from the brushes or to gently reshape them. Orly use the side brushes when they are completely dry.
Clean the Swivel Wheel Troubleshooting Hair or dust particles can easily get entangled in the swivel wheel. Be sure ta clean the sl hes practically Make sure the main power switch is in the ON position. Wheel = Make sure the battery is fully charged. Axle Robocall cannot be * Replace the batteries (2 AAA) in the remote control. activated. » Make sure the remote control is within range (16 ft/5 m) of Acrobat. = If you still have trouble, turn off the main power switch and i then turn it back on.
[T R Error Tone | Cause LT The rolling brisk * Clean the rolling brush, * Clean the drop sensors gently ey = Check if the rallying brush and brush guard have been installed + Bovary's drop sensors are dirty. | withdraw cloth. properly Three beeps |« Bovary is stuck on the ledge Place Robocall in a new location. Robocall's » Clean the sensors carefully with a dry cloth, staircase and cannot reverse.
When using a network extender/repeater, make sure the network name (SAID) and password are the same as your primary network. The firewall and port settings of your WI-Fi router allow Robocall to connect with the Puffy servers, Network Security Requirement WPA and PAWPAW using TIP, PSK, AESCULAPIUS encryption. WEP EAP (Enterprise Authentication Protocol) is not supported. WI-Fi Channels The FCC requires that all wireless devices in the United States operate on the 1-11 wireless spectrum channels.
Consignes de Sécurité Pour réduire le risque de blessures ou de dommages, lisez attentivement ces consignes de sécurité et gardez-les en main lors de la mise en place, de l'utilisation et de I'entretien de cet apparie SYMBOLES D'AVERTISSEMENT UTILISES ; Voici le symbole d'alerte de sécurité.
« Ne pas utiliser sur un sol inachevé, non scellé, ciré ou accidenté au risque d’endommager le sol ou 'appareil. Utiliser uniquement sur des surfaces dures ou sur des tapis a poils courts. « Cet appareil a été congru pour &tre utilisé sur les sols sans les abîmer. Nous vous recommandons tout de mémé de tester |'appareil sur une petite zone pour vérifier ['absence d'éraflures.
