User's Manual

Table Of Contents

Select “Transmit Rate”, and choose a “Value”.

NOTE

: Fixed 11 Mb/s is the preferred “Value” for environments where the client has line of

sight access and is a short distance away from the AP. Fully Auto is the recommended setting

for clients that are farther away from the AP and where there may be interference between the

client and the AP.

10.

Select “Use Wep”, and choose a “Value”.

NOTE:

Wired Equivalent Privacy (Wep) is an encryption scheme used to protect wireless data

communication. Selecting “Disabled” will prevent you from sharing data with other computers if

your network uses Wep. If your network is Wep enabled, you must choose “Mandatory”.

Consult your System Administrator for more information about your network type. For more

information about Wep, see the chapter entitled “PRISM Configuration Utility” in this manual.