User's Manual

36
Appendix A Troubleshooting
Problem Solving
My computer does not recognize the WL11000.
Probable Solution:
!
The WL11000 is not properly inserted into the PCMCIA slot.
!
Ensure that the WL11000 has been inserted into an available PCMCIA slot.
The WL11000 does not work properly.
Probable Solution:
!
Insert the PCMCIA adapter into Notebook’s slot again. A beep should be heard if the
adapter is properly inserted.
!
Check the I/O cable that connects the RF module and the PCMCIA adapter. The power
LED indicator will be active if the cable is properly connected.
!
For non-Windows 95/98 environments, ensure that a PCMCIA card service driver is
installed in your computer.
!
1) Click on the Control Panel and then on PC-Card. Check whether it has PCMCIA card
in one of the sockets or not. If you find PRISM2 IEEE 802.11 PC-Card Adapter in one of
the sockets, it means the card is detected properly. If you see the yellow sign of
!
question-mark(?), the resources are conflicting.
!
2)Right click on “My Computer” and the select Properties. Select the device Manager and
click on the Network Adapter. You will find PRISM2 IEEE 802.11 PC-Card Adapter if it is
installed successfully. If you see the Yellow sign the resources are conflicting. Click on