User's Manual

Table Of Contents

PCMCIA card and then on PCMCIA Card service, you can see the status of PCMCIA

card. If there are yellow sign either on adapter or PCMCIA card, please check followings.

2-1) Check if your Notebook supports 3.3V card.

2-2)Check if your Notebook has a free IRQ

2-3) Check that you have inserted the right card and have installed the proper driver.

If the WL11000 does not function after attempting the above steps, remove the PCMCIA adapter,

and do the following:

From the run window enter, c:\windows\system, locate and delete the cw10.sys file

Open the “Control Panel” double-click “System” and delete PRISM2 IEEE 802.11 PC-

card Adapter.

Restart the PC and repeat the hardware and software installation steps outlined in

Chapters 3 and 4.

The WL11000 station cannot communicate with other computers linked via Ethernet in the

Infrastructure configuration.

Probable Solution:

Ensure that the WL11000 with which the station is associated is powered on.

Confirm the station is configured with the same operating radio channel as the WL11000. If

the IDs are different, change the WL11000 and all the stations within the BSS to another

radio channel.

Ensure that the station is configured with the same security options as the WL11000, and

can be turned off and on with the same security key.

Confirm that the BSS ID is the same as the WL11000 for a roaming disabled station.

Alternately confirm that the ESS ID is the same as the WL11000 for a roaming enabled

station.