Instruction manual

Euphonix Max Air Mixing Console Operation Manual Busses
112
6.3 Configuring Aux Busses
Select the Busses Main Menu button, then select the Aux tab to display the Aux Bus
Settings shown in Figure 6-4. Each button pertains to a specific Aux function, which is
discussed in the following sections.
Figure 6-4 Aux Bus Settings View
NOTE: The number of Aux busses (16 or 24) depends on the Mixer Model.
6.3.1 Aux to Faders
It is now possible to control a selected Aux bus from the faders. Aux busses now have
12 dB of gain to match the range of the channel fader.
1. Touch the Aux to Faders button.
The button illuminates.
2. Touch the desired Aux bus to map onto the faders.
The button illuminates.
3. When finished, select another Aux or select a different Aux function.
This stays enabled if you navigate to a different Touchscreen so touch Aux to
Faders again to disable when finished.
This effects all channels including those not on the surface.