Instruction manual

Euphonix Max Air Mixing Console Operation Manual Busses

115

6.4 Mix Minus

Select the Mix Minus tab to display the Mix Minus Configuration View. Touch the

Strip View or Channel View buttons (1 in Figure 6-5) to display strips and channels,

respectively. The Mix Minus feature allows a broadcaster to hear all channels except

their own (see page 106 for a complete explanation of this feature).

Figure 6-5 Mix Minus Configuration-Strips View

Touch the arrows to select the Main, Swap, or Center levels (3).

Touch one of the four banks of 16 channels/strips to assign them to the Soft Knobs. The

top bank (2) is selected in Figure 6-5. The Soft Knobs are represented by the lowest two

rows labeled Mix Minus View (4). The knob sets that channel’s level sent to the mix

minus bus.

Push the Pre button down (illuminates) to set the level to pre-fader. When the Pre but-

ton is up (not illuminated), the level is post-fader.