Specifications
S5 Fusion Digital Audio Mixing System - InDepth
6
The Control Modules
The S5 Fusion surface is modular and comes with three differ-
enttypesofmodules(seeoppositepagefor5ftS5Fusionpack-
agesurface):
•CM401-TMasterControlModule(1ftwide,305mm)
•CM408-T8-FaderChannelStripModule(1ftwide,305mm)
-from1to7for8-56faders.
•CM411-JJoystickModule(1ftwide,305mm)
Optional modules...
•CM402-TSubmasterCentralAssignModule
•CM403-F/JFilmMonitoringPanelwithtwinJoystickModule
(1ftwide,610mm)ReplacesCM411-Jmodule
•CM409-FBlankModule(1ftwide,305mm)
S5 Fusion Frame
TheS5Fusionframeisavailableinthreesizessupporting5,7
or 9 modules.
The main console modules connect to the equipment rack via
Ethernet cables for extremely simple hookup, allowing the sur-
facetobeplacedlongdistancesfromtherack.TheCM401-T
Master Control Module also includes talkback wiring.
Theillustrationbelowshows the5-moduleframe.Widthsfor
Typical Equipment Rack
The rack below shows an S5 Fusion system equipment rack. The
MA703isusedformonitorfeeds.
ThestandardS5Fusionhas4MADIinsand4MADIouts-each
MADIcanhandleupto64channelsat48Khztotalling256x256
signal paths. These are the audio inputs and outputs to the
Euphonix DSP channels and buses. One of the MADI outs is
usedforthe MA703 monitorfeedMADI to analogconverter.
AddinganextraDSPcardadds4extraMADIinsandouts,up
toatotalof8MADII/O(512x512signalpaths)withtwoDSP
Cards.
Connections to and from the MADI I/O can be made to any
MADI converters including the full Euphonix range of modu-
larandmulti-channelconvertersshownonpage28.3rdparty
MADII/Ocanalsobeused.Oneofthecheapestandmostef-
fectivewaystoconnectDAWsistouseMADIPCIcardssuchas
the RME Hammerfall DSP MADI card.
Ethernet
Switch
Ethernet
EuCon to
Surface
Main Console Inputs and Outputs
can be fed from
Euphonix and 3rd party MADI I/O
MADI
SC264D Studio
Computer, up to
two SP663
DSP Cards
Monitors
1
9
17
2
10
18
3
11
19
4
12
20
5
13
21
6
14
22
7
15
23
8
16
24 A1 A2 D1 D2
1-8
9-16
17-24
Trim
TRIM
96
48
44.1
CUSTOM
AES
WORD
INTERNAL
AUTO
SR
CONV
MA703
DAC
Monitors
MONITOR-COMMS INTERFACE
MC
524
MC524
Monitor
Controller
CONTROL SURFACE
28.30” 719mm
41.52” 1,055mm
64.45” 1,637mm*
38.37” 975mm
63.53” 1,614mm*
60.44” 1,535mm*
28.30” 719mm
41.52” 1,055mm
64.45” 1,637mm*
38.37” 975mm
63.53” 1,614mm*
60.44” 1,535mm*
S5 Fusion 5-module frame dimensions...
S5 Fusion Width Dimensions Front Elevation
# of modules 5 7 9
width of con-
sole inc. trim
63.53” 1,614mm 87.77” 2,229mm 112.01” 2,845mm
width console
less trim
60.44” 1.535mm 84.68” 2,151mm 108.92” 2,767mm
width of legs
64.45” 1.637mm 88.65” 2.252mm 112.85” 2,866mm