Specifications

S5 Fusion Digital Audio Mixing System - InDepth
8
Channels
The number of cards in the DSP cards determine the number
of channels and buses that are available in each S5 Fusion. For
a given number of DSP cards, different combinations of chan-
nels and buses may be quickly configured using the eMix Mixer
Modelsoftware.UsuallyaMixerModelischosenduringinstal-
lation and is used throughout the life of the system as it will
best match the application requirements of the studio.
EachS5Fusionchannelhas:
•2inputs,thatmaybefedfromanalogordigitalsources
(usingappropriateconverters),labelledA&B.EitherA,B
or A & B may be selected to feed the channel.
•phasereverse
•gaintrim
•delayupto2secs
•insertsend&return
•4bandfullyparametricEQ
•2lters
•dynamicsincludingcompress/expand-gatewithhyster-
esis, key input and side chain filter
•touchsensitivemovingfader
•multi-formatpanningtogroupandmixbuses
•upto32mixbuses
•upto24groupbuses
•upto16auxsendbuses
•solo(APL,PFL,SIP)
•2directoutputs-pre-fader&post-fader
If mic preamps are connected to the channel these additional
controlsareavailablewhichrelatetotheML530remotemic/
lineinterfaceunit:
•inputimpedance-hi/lo
•phantompower
•hipasslter
•analoginputgain
Function
4 of 7
Function
5 of 7
Function
6 of 7
Function
7 of 7
EQ
Filters
Pre-Fader
Output
Solo
PFL/AFL
Aux
Sends
Grp
Pan/Route
Mix
Pan/Route
System Buses
Post-Fader
Direct Output
Fader
& Mute
Any Order
switchable in
pairs of channels
Insert
Function
3 of 7
Function
2 of 7
Delay
DYN
Key
Link
Trim & Phase
Input Select
Channel Inputs
A B
Function
2 of 8
Function
1 of 7
Meter
CHANNELS