Installation manual

Section 3: Automation Utilities
Euphonix CS3000/2000 MixView 3.0 Software Supplement 3 - 13
By default the Base Pass will be the first “FROM” pass in the list. It was your
starting pass and where the join pass will branch from.
The example outlined in the section introduction was pretty basic. You can get
quite creative with the Join operation however. Expanding on the example ,
imagine applying this join sequence to 4 faders only, and allow all other
automated objects to follow a separate Base Pass throughout the mix. Pass 8
is the default Base Pass in the above example, however any other pass in the
tree can be selected.
Access the Base Pass the same way you edit list parameters, (see above). Use
the SpinKnob to select the desired Base Pass.
We will use the above example, but change the Base Pass to 10. Our 4
selected faders will start on pass 8.
At the designated timecode point they will go to 5, then 12, They would
remain on 12 through the remainder of the mix. Our new Base Pass of 10 will
be applied to all other automated objects. When the Join operation is ex-
ecuted, the resultant pass will branch from pass 10, the new Base Pass.
Smart Display [F4] toggles the Pass Join system on or off.
• Import Mix allows the operator to place an entire mix into the pass tree
of another mix. Once a mix is imported it will be seen as a branch pass in
the current mix pass tree from pass 0. Combined with Off-Line Editing
and Pass Join, the possibilities for mix editing in v3.0 are endless.
• An Off-line Trim feature allows any fader or aux to be trimmed up or
down in .25dB increments, through the entire MIX, or just a certain
timecode-delimited range.
• The dB value of a fader in Abs write mode now appears below the UF or
LF number in the Pass Control screen for an accurate automation move.
• Group coalesce allows the Group Masters automation to be written into
its slaves as trim moves.
MixView 3.0 now includes a Monitor Before Record (MBR) automation
feature. Access is via the MBR button on the DSC.
Monitor Before
Record (MBR)
Other Automation
Features