Instruction manual

Euphonix Modular I/O Configuration Guide Product Data Sheets
111
3/4
Installation
MASTER MODE
-When ON, the HD943 is clock master for the frame (this master module
must be inserted in to one of the reserved slots in the rear-plane
SD-mode: 48 kHz audio clock is locked to 270 Mbit video carrier
Pattern Generator-mode: 48 kHz is locked to the video carrier
REMOTE / LOCAL
-In LOCAL mode, the DIP switch settings are valid on power up. Any previously
stored settings in the module are overwritten. Buss assignments are
automatically derived from the CAN address switch settings as follows:
For audio signals from any input module :
Sx+1 = IN1/2
Sx+2 = IN3/4
Sx+3 = IN5/6
Sx+4 = IN7/8
For audio signals to any output module :
Sx+5 = OUT1/2
Sx+6 = OUT3/4
Sx+7 = OUT5/6
Sx+8 = OUT7/8
Note: This is typically not a practical working configuration, however
LOCAL mode is useful in module testing.
HD943 8ch HD/SD De/Embedder