Instruction manual

Euphonix Modular I/O Configuration Guide Product Description
20
The DD901 provides decoding of Dolby E and Dolby digital
signals. Access to metadata parameters is via web-browser
interface (FC972 Remote required). Certain settings are
done from on-board switches such as device ID.
Connections, Power Consumption, Width, Weight
Dolby D/E input (BNC), Metadata out (9-pin DSub), 4HP.
1.3.14 DE911 Dolby E Encoder
General Description
The DD911 provides encoding of a Dolby E signal. Access
to metadata parameters is via web-browser interface (FC972
Remote required). Certain settings are done from on-board
switches such as device ID.
For proper operation, this unit must be locked to video sync
via an SY983 Sync module.
Connections, Power Consumption, Width, Weight
Dolby E output (BNC), Metadata in (9-pin DSub), 4HP.
1.3.15 DE912 Dolby D+ Encoder
General Description
The DD911 provides encoding of a Dolby D+ signal. Access
to metadata parameters is via web-browser interface (FC972
Remote required). Certain settings are done from on-board
switches such as device ID.
Connections, Power Consumption, Width, Weight
Dolby D+ output (BNC), Metadata in (9-pin DSub), 4HP.
1.3.16 SD941 4ch SD Embedder/De-embedder (discontinued)
General Description
The SD941 can embed or de-embed 4 channels of audio
to/from a single SD video signal as per SMPTE272M
standard. Embedding/de-embedding may be applied to any
of the four available 4-channel audio groups. Although the