User guide

Euphonix SH612 Studio Hub User Guide Getting Started

Synchronization signals are distributed via four AES Sync (AES/EBU), Word Clock,

video, or MTC outputs to System 5 or R-1 components. The SH612 can generate or

lock to Time code, or convert between different formats. All standard time code rates

are supported:

• Film: 24 fps

• PAL/SECAM: 25 fps

• Color NTSC: 29.97 (drop and non-drop)

• black and white video rate

• MIDI sequencers: 30 fps (drop and non-drop)

The SH612 routes digital audio via 12 MADI In and 12 MADI Out ports, each with the

capacity to receive or transmit up to 56 channels (up to 24-bit, 48 kHz). For sample

rates exceeding 50 kHz, each MADI channel can carry only 28 digital audio channels.

1.1.2 Power On Sequence

Attach the provided IEC-compatible power cable to the IEC inlet. Connect the other

end to a wall outlet with appropriate plug adapter if necessary. The SH612 power sup-

ply automatically adjusts to any voltage in the range 110–240 V.

We recommend powering up the SH612 before the digital devices to which it is con-

nected. The SH612 conducts a brief self-test routine upon power-up and displays the

firmware revision number. When the Main Menu is displayed, power up the attached

converters.

NOTE: Please refer to the power up routine for System 5 before attempting to power the

DF64 Digital Frames and the Pilot Computers.

1.2 MADI Connections for the R-1

These are the standard MADI connections for the R-1:

• MADI Ports 1–4 are for converter or I/O devices

• MADI Port 7 is for AudioDeck 1

• MADI Port 8 is for AudioDeck 2

• MADI Port 9 is for AudioDeck 3

• MADI Port 10 is for AudioDeck 4

• MADI Ports 5, 6, 11, and 12 are for additional MADI devices that require a

custom route to be used with the R-1 (see Section 3.1.5 - MADI Routing Menu).