User guide

professional control surface
USER GUIDESETUP AND INSTALLATION
18
2.2 Installation
1. If you downloaded the latest software from the web, double-click the installer.
Otherwise, insert the installation CD into your Macintosh.
NOTE: Be sure to eject the installation CD in your Mac if you downloaded the latest
software from the web.
2. Follow the instructions to install the software.
If prompted to download the most current version of EuControl, follow the
onscreen instructions.
EuControl will launch automatically and is running when this icon appears
in your menu bar.
Figure 2-6 Menu bar with EuControl icon
3. Shut down your Macintosh.
4. Plug one end of the AC power cord into the power adapter (Figure 2-7 left)
and the other into a power outlet. Make sure the AC power cord is pushed
all the way into the adapter.
Figure 2-7 Connecting the power adapter
5. Connect the DC output cable from the power adapter to DC In on the left side
of the rear panel (Figure 2-7 right).
EuControl
icon
DC In 15 V
FO
O
TSWITCH
power adapter
AC power cord
DC output
cable