- Eureka! Vacuum Cleaner User Manual

ENGLISH

INSTRUCTIONS FOR USE

• Before operating the vacuum cleaner, make certain that the dust bag

and lters are in the proper position.

1 Pull all of the power supply cord out from back of cleaner and plug

into electrical outlet.

Note: When pulling on power supply cord watch for a yellow line on

the cord. Then continue slowly pulling on cord till you see the red

line, stop. The red line indicates the end of usable cord.

2 Push the ON/OFF ( I ) button to switch the cleaner on.

3 To rewind the power cord, press the rewind button with foot and

guide the cord with hand to ensure that it does not whip causing

damage.

5 The suction control button on the hose handle is used to reduce suc-

tion for delicate work such as cleaning drapes or picture frames.

HOW TO USE

Floors should be cleaned regularly over heavily traveled areas, and once

a week over the entire area. Vacuum slowly, making several passes (for-

ward and backward), covering small areas at a time. The time required to

clean will depend on several factors - including type of oor and amount

of dirt.

CLEANING TOOLS

4* Combination Floor Nozzle: For carpets or hard surface oors.

5 Hose Suction Control Button: For use to increase or decrease

suction when using cleaning tools.

6 Combination Crevice Nozzle/Brush Tool: (stored in rear of

cleaner): For crevices, corners, baseboards, between cushions.

Brush rotates to allow use as brush or crevice depending on task.

*on some models.

* Depending on model

4.*

Hose Suction

Control Button