CHAMPION™ INSTRUCTIONS MANUAL
Cautions for the first use Remember, safety should be your first priority. 1. Please make sure that you disconnect all other electronic devices connected to the power line you plan on using for your iron. 2. Make sure that you have removed any packaging or protective covers from the soleplate. 3. When plugged in for the first time, you may notice slight smoke due to production grease. Do not worry as this will cease shortly. 4. Always avoid harsh contact between your iron and other metal objects.
Safety Instructions 1. Whenever you need to step away from the iron, make sure that you unplug it and leave the iron in a vertical position with soleplate facing upright. 2. Avoid children near the plugged iron. 3. Avoid contact of hot soleplate with your hands or flammable objects during use. 4. CAUTION! Make sure your iron is disconnected from the power supply before pouring water in the water tank. 5. DO NOT immerse any part of the iron in any type of liquid. 6.
Parts & Features 4 5 6 7 8 3 9 10 2 11 1 13 1. Spray Nozzle 2. Water Filling Cover 3. Steam Control 4. Steam Surge™ 5. Spray Mister 6. LED Indicator Light 7. Gripsoft™ Rubberized Handle 12 8. Retractable Control Button 9. Auto Shut-Off LED Indicator Light 10. Heat Settings Dial 11. Water Tank 12. Self-Cleaning Button 13.
Dry Ironing 1. Set the movable Steam Control Lever to point ‘’0’’. 2. Adjust ironing temperature in accordance with the fabric’s requirement. 3. The light “ON” indicates that the iron’s temperature is increasing steadily. Once desired temperature is reached, the light will turn “OFF” automatically. Filling with Water Before filling the water tank, make sure that the iron is unplugged, temperature dial is positioned at the “OFF” mark, and the iron is held at approximately 45º tilt.
Steam Ironing 1. Fill the water tank in accordance with the instructions in the “Filling with Water” section. 2. Plug the cord into the outlet. 3. The light “ON” indicates that the iron’s temperature is increasing steadily. Once desired temperature is reached, the light will turn “OFF” automatically. 4. According to your requirement, adjust the Steam Adjustable Control lever by turning right for more steam and left for less steam. 5.
Steam Surge™ This function is specially designed to remove the toughest wrinkles and creases present in heavy fabrics. By pressing the Steam Surge™ Trigger, a sudden surge of steam is expelled out of the soleplate, which is extremely useful in straightening even the most stubborn creases. For optimal results, make sure Steam Surge™ is used at higher temperatures and a regular 5 second delay between each steam burst is maintained. When steam is completely depleted, give it some time for steam to build up.
Vertical Steam By holding the iron in a vertical position, you can apply burst of steam to remove creases from curtains or any type of hanging fabrics. Anti-Drip An advanced system inside your iron prevents water leakage at even the lowest heat setting. Anti-Calc Over time, lime scales may accumulate inside the iron or on the soleplate’s surface. To prevent this, an anti-calc filter is permanently installed in this appliance. It cannot be removed for cleaning purposes. Auto Shut-Off 1.
15-Minute Auto-Off 30-Second Auto-Off 30-Second Auto-Off Operating Your Retractable Power Cord For your convenience, this steam iron has an automatic cord reel for easy-handling and hassle-free storage at the push of a button. 1. When you have finished using your iron, make sure the steam selector is on “0” and the thermostat dial is on “OFF”. 2. Unplug your iron. 3. When winding the cord, hold the plug with one hand, and press the retractable control button with your other hand.
4. The cord reel is made for multi-layer winding. If the cord is not fully rewound, press the retractable cord reel button and pull the cord gently outward. This will help steer the cord evenly on the reel. 5. If the cord does not pull out easily, press the retractable cord reel button to help release the cord. 6. Select the desired cord length before plugging the iron into an electrical outlet. 7. Do not allow children to use the retractable cord feature as the cord may cause injury.
6. Once the indicator light goes off, turn the thermostat dial to OFF and disconnect the iron from the power line. 7. Firmly hold the iron over the sink and press/hold the self- cleaning button for several seconds. 8. Shake the iron back and forth while pressing the self-cleaning button. Steam and boiling water will expel along with impurities and other.
9. CAUTION! Avoid any contact with the iron during the cleaning process and firmly hold it above the sink to prevent any burns. 10. You can repeat the self-cleaning process if there are still some leftover impurities. 11. Dry up the soleplate by plugging the iron into the outlet. It will heat up the soleplate and evaporate water droplets. 12. Disconnect the iron from the power outlet once it reaches the required temperature. Then carefully remove any water stains with a piece of dry cloth. 13.
Heat Settings Dial Caution Please note that this symbol on your fabric’s label means this article may not ironed.
Cleaning & Maintenance Before you begin cleaning, unplug the iron and allow it to cool down. 1. Clean the soleplate with any moist cloth and non-abrasive cleaner. 2. If fibers stick to the soleplate, use damp cloth immersed in vinegar to wipe off adherent fibers. 3. Never use strong acids or cleaning solutions when cleaning soleplate. 4. Remove any left over water from the water tank. 5. Make sure the steam selector is set to ‘’0’’ and the thermostat dial is set to “OFF” before putting your iron away.
Troubleshooting Problem Possible Reasons Solution There is little heat or no heat. Cord may be unplugged or thermostat improperly set. Cross check thermostat dial and look for any error in power transmission. Steam stopped or there is leakage. Thermostat dial is set at the OFF mark. Adjust thermostat dial to your desired setting. There is no flow of steam or vertical steam is absent. Repeated usage of vertical burst of steam or the iron is not hot enough.
Warranty This product has a warranty for 2 years from provable date of purchase against defects in material and workmanship. During this period such defects will be repaired, or the product will be replaced at no charge. This warranty does not cover damage caused by misuse, negligence, or improper installation. Warranty is also invalid in any case that the product is taken apart or serviced by an unauthorized service station.
MORE GREAT EUREKA PRODUCTS
HEAT RESISTANT 3-FINGER GLOVE (MODEL: ER1033) HEAT RESISTANT IRONING GLOVE (MODEL: ER1035) PROTECTIVE IRON CASE (MODEL: ER1050)
EXTRA LARGE PROTECTIVE IRONING MESH (MODEL: ER1020) SILICONE IRON REST PAD (MODEL: ER1040) IRON & BOARD HOLDER (MODEL: ER1010) SUPER MAGNETIC IRONING MAT (MODEL: ER1025)
THANK YOU FOR PURCHASING PRODUCTS FOR MORE INFO PLEASE VISIT: WWW.EUREKAGARMENTCARE.