User Manual

To pause the automatic dispensing before the grinding time has elapsed, press

the grinding start button (5) with the filter holder:

• Press the button (5) again to restart the dispensing for the remaining time.

• Keep pressed the button of the selected dose (blinking) to stop dispensing.

The grinding time goes back to the value set.

5.4.3 CONTINUOUS DISPENSING

Press the single dose (18) and double dose (19) . buttons at the same time to

access this mode.

The symbol (15)

appears on the display.

The continuous dispensing lasts up to max 60 seconds.

To exit the continuous dispensing mode, keep pressed the single dose (18)

or the

double dose(19)

button for some seconds.

5.4.4 LOCKING THE TIME

Press the buttons(16) and (17) . at the same time. When releasing them, the

dose dispensing time adjustment stops. Furthermore, on the display the buttons (16)

and (17) disappears.

Press both buttons (16)

and (17) again to unlock the functions.

5.4.5 DOSE COUNTS

When starting the machine, keep pressed for 5 seconds the grinding start button (6) and

then select one of the counts:

• Single dose button (18)

: access to the count of the dispensed single doses;

• Double dose button (19)

: access to the count of the dispensed double doses;

• Single dose button (18)

and double dose button (19) : access to the count

of the dispensed continuous doses;

On the display, only the selected buttons remain on and the numbers of doses are

shown in pairs progressively.

For instance, if the dose total is 142536, the display shows the digits 14, 25, and 36

Libro 1.indb 133Libro 1.indb 133 30/11/2020 11:47:2030/11/2020 11:47:20