Installation Guide

ManualsBrandsEuri Lighting ManualsLED Bulbs4 ft. 15-Watt Linear T8 LED Light Bulb, Cool White

INSTALLATION GUIDE

MODEL #:

ET8-2141T-15 / ET8-2151T-15

Linear Series | T8 Class

4 ft. Bypass Ballast LED Tube

WARNINGS CAUTIONS

• Please read the installation instructions very carefully and follow the

wiring instructions to ensure safety

• Product is not dimmable

• Always switch off the power supply before commencing work

• Only apply in dry indoor environments.Outdoor applications require a

proper IP rated fixture

• Do not change the structure or any components of the led tube to

ensure safety.

• LED Tube is designed to fit in standard IEC compliant G13 bi-pin

lampholders.

• LED Tube must be installed by a professional electrician in

accordance with the relevant electrical codes.

• Please keep this Quick installation Guide for future system

maintenance.

Check whether the system is an Electro Magnetic ballast based system

or electronic ballast based system,and follow instructions accordingly.

When installing the LED tube, ensure the diffuser of the tube is pointing

in the direction where the light is required.

Incorrect installation or wiring may cause product failure, or other is-

sues!

Please operate right installation steps!

WHEN BYPASSING A BALLAST ALWAYS HAVE A QUALIFIED ELECTRICIAN DO YOUR ELECTRICAL WORK.

BYPASS BALLAST INSTALLATION INSTRUCTIONS

Single Ended Bypassing of Magnetic Ballast

1. Turn-off power before installation.

2. Remove the existing ballast

3. Remove existing starter (If present)

4. Rewiring of BALLAST diagram per tube. Repeat for multiple tubes.

5. Results of rewiring should appear as shown.

6.ReplaceuorescenttubewithLEDTube

7. Remove any pre-existing labels and replace them with the labels provided with this product. Turn on.

USE LED LAMPS ONLY. THIS

LUMINAIRE HAS BEEN MODIFIED

TO USE LED LAMPS AND CAN NO

LONGER OPERATE THE ORGINALLY

INTENDED FLUORESCENT LAMPS

SAFELY.

FLUORESCENT LAMPS COULD BREAK AND CAUSE

PERSONAL INJURY IF USED IN THIS FIXTURE.

WARNING!

For customer service please call us at 1-888-743-5766

OfceHours:8:00a.m.–5:00p.m.PSTMonday-Friday

Questions?



PLEASE REVIEW THE INSTRUCTIONS AND WARNINGS LISTED BELOW PRIOR TO PROPER INSTALLATION

Bypass Ballast

Summary of content (2 pages)

PAGE 1
INSTALLATION GUIDE MODEL #: ET8-2141T-15 / ET8-2151T-15  Linear Series | T8 Class 4 ft. Bypass Ballast LED Tube Questions? For customer service please call us at 1-888-743-5766 Office Hours: 8:00 a.m. – 5:00 p.m.
PAGE 2
INSTALLATION GUIDE MODEL #: ET8-2141T-15 / ET8-2151T-15  Linear Series | T8 Class 4 ft. Bypass Ballast LED Tube Questions? For customer service please call us at 1-888-743-5766 Office Hours: 8:00 a.m. – 5:00 p.m. PST Monday-Friday Bypass Ballast PLEASE REVIEW THE INSTRUCTIONS AND WARNINGS LISTED BELOW PRIOR TO PROPER INSTALLATION WHEN BYPASSING A BALLAST ALWAYS HAVE A QUALIFIED ELECTRICIAN DO YOUR ELECTRICAL WORK.