User Manual

For easy access to the bottles, you must pull the shelves approximately 1/3 of its depth out of the rail
compartment. The wooden shelves are designed with stopper to hook against each sides of the shelf track to
prevent bottles from falling.
hen removing a shelf from the rail compartment in E150WSCS, make sure to remove all items first, then move
the shelf to the stop position and lift over to take the shelf out.
Interior Light
You can turn on/off the interior light by pressing the “Globe” button.
The light will be turned off automatically if it remains ON for 10 minutes. You have to press the “Globe” button
again and the light will turn back on. For the best storage condition, please keep the light off except while
viewing.
Installing Stainless Steel Handle
This wine cooler includes a stainless steel handle that is required to operate this unit. To install the handle please
follow the below instruction:
1. Pull away the door gasket in the area where the handle is to be installed – you can see two designated
holes for handle installation. The gasket is easily displaced by hand, no tools are necessary.
2. Install the handle tightly as shown below with the two screws. Lock washers and flat washers provided.
(DO NOT over tighten as this will cause damage to the handle assembly and stainless steel surface of
glass door).
3. Replace the door gasket to its original position.