User Manual

Important
The LCD displays by default the actual internal air temperature. It’s important to understand that there is a
difference between the air temperature inside the wine cooler and the actual temperature of the wine” You
will need to wait approximately 12 hours before noticing the effects of temperature adjustment due to the
critical mass within a full wine cooler. Once the thermostat is set it is strongly advised not to toy with it or adjust
frequently. The thermostat will maintain the temperature inside the wine cooler within a +/-2.5 ºC range, the
actual temperature of the wine will only fluctuate 0.5 ºC to 1 º C.
1. Factory preset Temperature Chart:
 The upper compartment: 5 ºC
 The lower compartment: 12 ºC
2. Control panel of wine cooler:
Display Windows
 RUN light Indicator light of compressor working. While the compressor operating, the red light is on. While
it stops operating, the red light is off.
 UPPER CHAMBER Display of the actual temperature of the upper chamber. The range is 0℃~37℃ or
32℉~99℉.
 LOWER CHAMBER Display of the actual temperature of the lower chamber; the range is 0℃~37℃ or
32℉~99℉.
 ℃/℉ light When the ℃ light is on, it indicates Celsius temperature; when the ℉ light is on, it indicates
Fahrenheit temperature.

Button Operation
 SET Button of the upper chamber Temperature setting button; Once you press the button, the
temperature increase 1℃ or 1℉. Setting range is between 5℃~12℃ or 41℉~54℉.
 SET Button of the lower chamber Temperature setting button; Once you press the button, the
temperature increase 1℃ or 1℉. Setting range is between 12℃~22℃ or 54℉~72℉.
 LIGHT Button
Cabinet light control button; Note: Once the light is turned on, it will automatically off after
10 minutes all out of protecting the wines inside.
 ℃/℉ Button Celsius and Fahrenheit conversion button;
 ON/OFF button Power on and off button; Press the button, it starts; press it again, it stops.