Product Manual

Temperature Setting
Depending on the loading and settings chosen, it takes 24 hours for the beverage cooler temperature to
stabilize. During this time, the LED temperature display may seem to move erratically. This is a normal process.
This process occurs whenever the setting is modified and/or whenever large amounts of cans or bottles are
added to the beverage cooler. In the event of a power interruption, all previous temperature settings are
automatically erased and it will revert to the pre-set temperature setting.
Important
The LCD displays by default the actual internal air temperature. It’s important to understand that there is a
difference between the air temperature inside the beverage cooler and the actual temperature of the
beverages” You will need to wait approximately 12 hours before noticing the effects of temperature
adjustment due to the critical mass within a full beverage cooler.
Once the thermostat is set it is strongly advised not to adjust it frequently. The thermostat will maintain the
temperature inside the beverage cooler within a +/- 2.5 ºC range, the actual temperature of the beverages
will only fluctuate 0.5 ºC to 1 ºC.
Beverage Cooler Control panel
The LCD displays the internal air temperature. The desired temperature can be adjusted by pressing Set
button and then Up and Down buttons, the temperature setting can be adjusted from 0 ºC to 10 ºC. Press Set
button, the set temperature will temporarily flash in the LCD display for 5 seconds.
Cooling Indicator light
When the light is on, the cooling mode is currently in operation.
Interior Light
You can turn on/off the interior light by pressing the “Globe” button.
For the best storage condition, please keep the light off except while viewing.
Instruction on how to replace the inside LED light .
Take off the screws from the lids, unplug LED light and then re-plug a new LED light to instead.