Product Manual

INSTALLING STAINLESS STEEL HANDLE
This beverage cooler includes a stainless steel handle that is required to operate this unit.
To install the handle please follow the instruction below
1. Pull away the door gasket in the area where the hand
le is to be installed – you can see two
designated holes for handle installation. The gasket is easily displaced by hand, no tools are
necessary.
2. Install the handle tightly as shown below with the t
wo screws. Lock washers and flat washers provided.
(DO NOT over tighten as this will cause damage to the handle assembly and stainless steel surface of
glass door).
3. Replace the door gasket to its original position.