USAGE AND CARE GUIDE 352'8&7 &2'(6 ($ 6'6;/ ($ 6'6;5 ($ :)%/ ($ :)%5 ($ :)6; / ($ :)6; 5 ($ :6'%/ ($ :6'%5 ($ 6'6; ($ :)%/ ($ :)6; ($ :6'%
INDEX INSTALLATION Safety Information Recommendations before loading & plugging in the beverage cooler Grounding Instructions Assembly Levelling Your Beverage Cooler OPERATING YOUR BEVERAGE COOLER Defrosting/hygrometry/condensation/ventilation Temperature setting Beverage Cooler Control panel Cooling Indicator light Interior Light Installing Stainless Steel Handle Power Failures and Operation Anomalies CARE AND MAINTENANCE Clean the condenser Care when going on Vacation Moving your Beverage Cooler Energy sa
INSTALLATION Safety Information Warning All electrical work must be carried out by suitably qualified persons This beverage cooler is an outdoor appliance. This appliance is intended for household use only. It is designed to be used in sheltered areas only and must not be exposed to the elements. It can be installed in an alfresco area in accordance with the following: Unit must not be exposed to direct sunlight, rain, moisture or dust.
Recommendations before loading & plugging in the beverage cooler Be unencumbered and well ventilated; Be well away from any heat source and direct sunlight or rain; Not be too damp (laundry, pantry, bathroom, garage and basement, etc.); Have a flat, level and dry floor; Have a standard and reliable electricity supply (10A General purpose outlet properly earthed). It is not recommended to use a multi-socket or extension lead; Have a surge protector fitted to the electrical outlet.
where there is frequent lightning, it is advisable to use surge protectors. Improper use of the grounding plug can result in the risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
OPERATING YOUR BEVERAGE COOLER 1. Turning on your beverage cooler. Plug in and switch on the beverage cooler by pressing on the power button for a few seconds. When you use the beverage cooler for the first time (or restart the beverage cooler it has been switch off for a long time), there will be a few degrees variance between the temperature you have selected and the one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Important Do not pull out more than one loaded rack at a time as this may cause the beverage cooler to tilt forward. Do not cover the metal racks with aluminum foil or other materials, as it will obstruct air circulation. Do not move your beverage cooler while it is loaded with beverages. This may distort the main cabinet. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
Temperature Setting Depending on the loading and settings chosen, it takes 24 hours for the beverage cooler temperature to stabilize. During this time, the LED temperature display may seem to move erratically. This is a normal process. This process occurs whenever the setting is modified and/or whenever large amounts of cans or bottles are added to the beverage cooler.
INSTALLING STAINLESS STEEL HANDLE This beverage cooler includes a stainless steel handle that is required to operate this unit. To install the handle please follow the instruction below 1. Pull away the door gasket in the area where the handle is to be installed – you can see two designated holes for handle installation. The gasket is easily displaced by hand, no tools are necessary. 2. Install the handle tightly as shown below with the two screws. Lock washers and flat washers provided.
Power Failures And Operation Anomalies In the event of a power interruption, all previous temperature settings are automatically erased and the beverage cooler will revert to a preset temperature setting. Most power failures are corrected within a short period of time. A loss of power for an hour or two will not affect your beverage cooler’s temperature. To avoid sudden change of temperature while the power is off, you should avoid opening the door.
CARE AND MAINTENANCE Clean the condenser The condenser must be kept clean and free of dust at all times. It is recommended that the cleaning routine be conducted at intervals appropriate to the speed of accretion of dust on the condenser. Failure to keep the condenser clean will damage the refrigeration system and invalidate the warranty. Important The condenser is a delicate component and is easily damaged. Never use a stiff brush or sharp objects to clean it. Never use water.
Recommended Cleaning Product Switch off and disconnect from the power supply before cleaning Clean the interior of the appliance using the recommended products in accordance with local hygiene laws and regulations. Do not use abrasive cleaning agents, which may scratch and harm the delicate interior finishes of your appliance. Always wipe dry after cleaning. AKTIVO All Purpose AKTIVO All Purpose Cleaner is our eco-friendly, natural, citrus fresh scented and strong cleaner for your homes.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Beverage cooler does not operate Not plugged in. The appliance is turned off. The circuit breaker has tripped or a fuse has Blown. Beverage cooler is not cold enough. Check the temperature control setting. External environment may require a higher setting. The door is opened too often. The door is not closed completely. The door gasket does not seal properly. Turns on and off frequently The room temperature is hotter than normal.
TECHNICAL SPECIFICATIONS EA60 Series Stainless Steel Beverage Cooler Item Number Stype EA60WFSX2L EA60WFSX2R EA60SDSXL EA60SDSXR Stainless Steel Stainless Steel Stainless Steel Stainless Steel Glass Door Glass Door Solid Door Solid Door Left Door open Right Door open Left Door Open Right Door Open Cooling System Compressor Cooling Compressor Cooling 128L 128L Climate Glass T T Rated Voltage AC220V-240V / 50Hz AC220V-240V / 50Hz Rated Current 1.0A 1.0A 0.83kW.h/24h 0.83kW.
EA60 Series Black Beverage Cooler Item Number Stype EA60WFBL EA60WFBR EA60WSDBL EA60WSDBR Black Frame Black Frame Black Frame Black Frame Glass Door Glass Door Solid Door Solid Door Left Door open Right Door open Left Door Open Right Door Open Cooling System Compressor Cooling Compressor Cooling 128L 128L Climate Glass T T Rated Voltage AC220V-240V / 50Hz AC220V-240V / 50Hz Rated Current 1.0A 1.0A 0.83kW.h/24h 0.83kW.
EA90 Series Beverage Cooler Item Number Stype EA90SDSX EA900WFSX2 EA900WFBL EA900WSDB Stainless Steel Stainless Steel Black Frame Black Frame Solid Door Glass Door Glass Door Solid Door Cooling System Compressor Cooling Compressor Cooling 208L 208L Climate Glass T T Rated Voltage AC220V-240V / 50Hz AC220V-240V / 50Hz Rated Current 1.3A 1.3A 1.2kW.h/24h 1.2kW.h/24h R600a R600a 50g 50g 0-10’C 0-10’C 900x500x840mm 900x500x840mm 53.5kgs 53.5kgs Volumn Energy Consump.
DIMENSION DRAWINGS EA60WFSX2L - EA60WFBL EA60SDSXR - EA60WSDBR EA60SDSXL - EA60WSDBL EA60SDSXR - EA60WSDBR
SPARE PARTS Note : The information in this document is subject to modification without any prior notice.
Pronto Service + Support: 1800 440 335 Email: service@eurostylegroup.com.au HEAD OFFICE 65 Glynburn Road, Glynde SA 5070 Ph: 08 8165 1012 www.euroappliances.com.