---refrigeration USE AND CARE GUIDE MODELNO. EA900WFSX2 EA90SDSX EA900WFBL EA900WSDB EMBRACE EUROPEAN QUALITY+PASSION www. eu roappli a nces.com .
Warning The information in this document is subject to modification without any prior notice. This beverage cooler is an outdoor appliance. This appliance is intended for household use only. It is designed to be used in sheltered areas only and must not be exposed to the elements. It can be installed in an alfresco area in accordance with the following: • Unit must not be exposed to direct sunlight, rain, moisture or dust.
The appliance is intended to be used in household and similar applications such as: - Staff kitchen areas in shops, offices and other working environments; - Farm houses and by clients in hotels, motels and other residential type environments; - Bed and breakfast type environments; - Catering and similar non-retail applications.
WARNING: Keep ventilation openings, in the appliance enclosure or in the builtin structure, clear of obstruction. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING: Do not damage the refrigerant circuit. WARNING: This product should not be disposed by the customers, please contact your local authorities and ask for the correct method of disposal.
*Installing your beverage cooler Unpack and remove all of the protection and adhesive strips from the packaging around and inside the beverage cooler. Important: Before connecting the unit to a power source, please let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. The beverage cooler must be positioned so that the plug is accessible.
*Products & Specifications EA60WFSX Type Item Number Bottle Capacity Dimension (W*D*H) Weight Refrigerant Cooling System Energy Consumption Temperature Range Rated Voltage Rated Frequency Input Power Stainless Steel Beverage Cooler EA60WFSX 138L 600*500*840mm 44KG R600a/35g Compressor Cooling 0.
*Operating your beverage cooler 1) Turning on your beverage cooler. Plug in and switch on the beverage cooler by pressing on the power button for a few seconds. When you use the beverage cooler for the first time (or restart the beverage cooler it has been switched off for a long time), there will be a few degrees variance between the temperature you have selected and the one indicated on the LED readout. This is normal and it is due to the length of the activation time.
- If you do not have enough cans or bottles to fill your beverage cooler, it is better to distribute them throughout the beverage cooler so as to avoid “all on top” or “all below” type loads. - Remove or relocate metal racks to accommodate large type of cans or bottles where necessary. - Keep small gaps between the wall and the cans or bottles to allow air circulation. - To facilitate air circulation, do not over load your beverage cooler.
*Temperature Setting Notes: depending on the loading and settings chosen, it takes 24ours for the beverage cooler temperature to stabilize. During this time, the LED temperature display may seem to move erratically. This is a normal process. This process occurs whenever the setting is modified and/or whenever a large amount of cans or bottles are added to the beverage cooler.
Interior Light: You can turn on/off the interior light by pressing the “ Globe” button. The light will be turned off automatically if it remains ON for 10 minutes. You have to press the “Globe” button again and the light will turn back on. For the best storage condition, please keep the light off except while viewing. *Defrosting/Hygrometry/Condensation/Ventilation Your beverage cooler is designed with auto defrost system.
* Installing Stainless Steel Handle This beverage cooler includes a stainless steel handle that is required to operate this unit. To install the handle please follow the instruction below: 1. Pull away the door gasket in the area where the handle is to be installed – you can see two designated holes for handle installation. The gasket is easily displaced by hand, no tools are necessary. 2. Install the handle tightly as shown below with the two screws. Lock washers and flat washers provided.
*Power Failures and Operation Anomalies In the event of a power interruption, all previous temperature settings are automatically erased and the beverage cooler will revert to a preset temperature setting. Most power failures are corrected within a short period of time. A loss of power for an hour or two will not affect your beverage cooler’s temperature. To avoid sudden change of temperature while the power is off, you should avoid opening the door.
*Troubleshooting Guide PROBLEM POSSIBLE CAUSE Beverage cooler does not Not plugged in. operate. The appliance is turned off. The circuit breaker has tripped or a fuse has blown Beverage cooler is not cold Check the temperature control setting. enough. External environment may require a higher setting. The door is opened too often. The door is not closed completely. The door gasket does not seal properly. Turns on and off frequently. The room temperature is hotter than normal.
may cause popping and crackling noises. The Beverage cooler is not level. The door will not close properly. The Beverage Cooler is not level. The door was reversed and not properly installed. The gasket is dirty. The shelves are out of position. Pronto Service + Support: 1800 440 335 65 Glynburn Road, Glynde, SA 5070 Email: info@euroappliances.com.au Head Office: (08) 8165 1012 www.euroappliances.com.