cooking USAGE AND CARE GUIDE PRODUCT CODE: ECT70C6
Safety Warnings Your safety is important to us. Please read this information before using your cooktop. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. • Alterations to the domestic wiring system must only be made by a qualified electrician. • Failure to follow this advice may result in electrical shock or death.
installation. • This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • Failure to install the appliance correctly could invalidate any warranty or liability claims. Operation and maintenance Electrical Shock Hazard • Do not cook on a broken or cracked cooktop.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot • Keep children away. • Handles of saucepans may be hot to touch. Check saucepan handles do not overhang other cooking zones that are on. Keep handles out of reach of children. • Failure to follow this advice could result in burns and scalds. Cut Hazard • The razor-sharp blade of a cooktop scraper is exposed when the safety cover is retracted.
• Do not allow children to play with the appliance or sit, stand, or climb on it. • Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • Do not leave children alone or unattended in the area where the appliance is in use. • Children or persons with a disability which limits their ability to use the appliance should have a responsible and competent person to instruct them in its use.
or similarly qualified persons in order to avoid a hazard. •This appliance is intended to be used in household and similar applications such as: -staff kitchen areas in shops, offices and other working environments; -farm houses; -by clients in hotels, motels and other residential type environments ; -bed and breakfast type environments. •WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
•WARNING: Danger of fire: do not store items on the cooking surfaces. • Warning: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock, for hob surfaces of glass-ceramic or similar material which protect live parts •A steam cleaner is not to be used. •The appliance is not intended to be operated by means of an external timer or separate remote-control system.
Congratulations on the purchase of your new Ceramic Hob. We recommend that you spend some time to read this Instruction / Installation Manual in order to fully understand how to install correctly and operate it. For installation, please read the installation section. Read all the safety instructions carefully before use and keep this Instruction / Installation Manual for future reference. Product Overview Top View 1. max. 1200 W zone 2. max. 1100 /2000W zone 3. max. 1200 W zone 4. max. 1000 / 2200W zone 5.
Product Information The microcomputer ceramic cooker hob can meet different kinds of cuisine demands because of resistance wire heating, micro-computerized control and multi-power selection, really the optimal choice for modern families. The ceramic cooker hob centers on customers and adpots personalized design. The hob has safe and reliable performances, making your life comfortable and enabling to fully enjoy the pleasure from life.
Choosing the right Cookware Do not use cookware with jagged edges or a curved base. Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone. Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
Using your Ceramic Hob To start cooking 1. Touch the ON/OFF control. • After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that the ceramic hob has entered the state of standby mode. 2. Place a suitable pan on the cooking zone that you wish to use. • Make sure the bottom of the pan and the surface Of the cooking zone are clean and dry. 3. Select a heat setting by touching the or control.
When you have finished cooking 1a. Turn the cooking zone off by scrolling down to “-“ or touching control together. 1b. Turn the whole cooktop off by touching the ON/OFF and control. 2. Beware of hot surfaces will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still hot.
Using the Dual zone function • The function only work in 2# and 4# cooking zones • The dual cooking zone has two cooking areas that you can use a central section and an outer section. You can use the central section (A) independently or both sections (B) at once. Zone 2# Zone 4# Active the Dual zone 1. Select a cooking zone(e.g. 4#) by touching the or 2. Adjust the heating setting between power levels 1 and 9 (e.g. 6) 3. central section of the dual cooking zone will switch on.
4. Touching the dual zone control “◎“ , 5. A neon above the dual cooking zone control flash. 6. After 5 seconds, the light stop flashing.The cooking zone indicator show “ = “ and “ ” alternately. Deactive the Dual zone 1. Select cooking zone 4# by touching the or 2. Touching dual zone control again, the dual zone function is deactive. 3.
Locking the Controls • You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on). • When the controls are locked, all the controls except the ON/OFF control are disabled. To lock the controls Touch the keylock control. The timer indicator will show “ Lo“ To unlock the controls 1. Make sure the ceramic hob is turned on. 2. Touch and hold the keylock contro for a while. 3. You can now start using your ceramic hob.
Using the Timer You can use the timer in two different ways: • You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up. • You can set it to turn one cooking zone off after the set time is up. • You can set the timer for up to 99 minutes. Timer overview Minute display shows the number Timer of minutes regulating control Using the Timer as a Minute Minder If you are not selecting any cooking zones 1. Make sure the cooktop is turned on.
3. Set the time by touching the of the timer or control Hint: Touch the or control of the timer once to decrease or increase by 1 minute. Touch and hold the or control of the timer to decrease or increase by 10 minutes. If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute. 4. Touching the and together, the timer is cancelled, and the”--“ will show in the minute display. 5. When the time is set, it will begin to count down immediately.
Setting the timer to turn one cooking zone off Cooking zones set for this feature will: 1. Touch the or of the corresponding cooking zone you want to set the timer for. 2. Set the time by touching the or control of the timer Hint: Touch the or control of the timer once will decrease or increase by 1 minute. Touch and hold the or control of the timer will decrease or increase by 10 minutes. If the setting time exceeds 99 minutes, the timer will automatically return to 00 minute. 3.
4. When the time is set, it will begin to count down immediately. The display will show the remaining time and the timer indicator flash for 5 seconds. NOTE: The red dot next to power level indicator will illuminate indicating that zone is selected. 5. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
soups and tender stews because the flavours develop without overcooking the food. You should also cook egg-based and flourthickened sauces below boiling point. • Some tasks, including cooking rice by the absorption method, may require a setting higher than the lowest setting to ensure the food is cooked properly in the time recommended. Searing steak To 1. 2. 3. cook juicy flavoursome steaks: Stand the meat at room temperature for about 20 minutes before cooking. Heat up a heavy-based frying pan.
with the cooktop to find the settings that best suit you.
Boilovers, melts, and hot sugary spills on the glass Spillovers on the touch controls Remove these immediately with a fish slice, palette knife or razor blade scraper suitable for ceramic glass cooktops, but beware of hot cooking zone surfaces: 1. Switch the power to the cooktop off at the wall. 2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a cool area of the cooktop. 3. Clean the soiling or spill up with a dish cloth or paper towel. 4.
The glass is being scratched. Some pans make crackling or clicking noises. Rough-edged cookware. Use cookware with flat and smooth bases. See ‘Choosing the right cookware’. Unsuitable, abrasive scourer or cleaning products being used. This may be caused by the construction of your cookware (layers of different metals vibrating differently). See ‘Care and cleaning’. This is normal for cookware and does not indicate a fault.
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm) 700 520 55 51 560+4 490+4 50 mini +1 +1 Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet and outlet are not blocked. Ensure the ceramic cooker hob is in good work state. As shown below Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm.
not apply force onto the controls protruding from the hob. Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation. A B C D screw bracket Screw hole base Adjust the bracket position to suit for different work surface’s thickness. Cautions 1. The ceramic cooker hob must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. 2.
standard,or a single-pole circuit breaker.the method of connection is shown below. 1. If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents. 2. If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts. 3.
This appliance is labeled in compliance with European directive 2002/96/EC for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way. The symbol on the product indicates that it may not be treated as normal household waste.
Pronto Service + Support: 1800 440 335 Email: service@eurostylegroup.com.au HEAD OFFICE 65 Glynburn Road, Glynde SA 5070 Ph: 08 8165 1012 www.euroappliances.com.
