Product Manual

EN - 24
9. MAINTENANCE
AND CLEANING OF
YOUR MACHINE
9.1. Warning
1 2
Turn your mains power
supply off and remove
the plug from the socket
before carrying out
maintenance and cleaning
your machine.
Turn off the cold water
supply before starting
maintenance and cleaning
your machine.
CAUTION: Do not
use solvents, abrasive
cleaners, glass cleaners
or all-purpose cleaning
agents to clean your
Washer Dryer. They
may damage the plastic
surfaces and other
components with the
chemicals they contain.
9.2. Water Inlet Filters
Water inlet filters prevent dirt and foreign
materials from entering your machine. We
recommend that these filters are cleaned
when your machine is unable to receive
sufficient water, although your water supply
is on and the tap is open. We recommend
that you clean your water inlet filters every
2 months.

Washer Dryer.













CAUTION: The water inlet
filters can become clogged due to water
quality or lack of required maintenance and
may break down. This may cause a water
leak. Any such breakdowns are out of the
scope of the warranty.
9.3. Detergent Drawer
The use of detergent may cause residual
build up in the detergent drawer over
time. We recommend that you remove
the drawer every 2 months to clean the