Product Manual

Fix the brackets :
Right
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ
150 or ɸ 120 mm, the choice of
w
hich is left to the installer.
 If to install a ɸ 120 mm air exhaust connection, insert the reducer
fl
ange 3 on the h
ood bod
y
outl
et.
 Fix the pi
pe
4 i
n
pos
i
ti
on us
i
ng s
u
fficient pipe clamps (not
supplied).
 Remov
e pos
s
i
bl
e c
harcoa
l
fi
l
ters.
Wrong
 Drill holes at the marked points with a ɸ10 mm drill bit.
 Insert the Wall Plugs 11 into the holes.
 Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) at the horizontal line A.
 Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) at the horizontal line B.
Hook the hood body
Hook the hood body to the bracket 20.
Level the hood body itself.
Remove the filter from the inside of the hood body, fix the screws 10 to Wall Plugs 11 at the
points (3).
CONNECTIONS
6