Product Manual

LIGHTING
LIGHT REPLACEMENT(Completed by professionals)



You cannot replaced the light bulbs, the entire light module has to be replaced.
When changing the light modules, the contacts are live.
Before changing the light module(s), unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
Replacing the light modules




Remove the grease filter .
Disconnect the terminal of LED light.
Press LED light on the back of the front plate, take the LED light out.
Replace the lamp(commercially available LED lamp (max.1.5w).



Press LED light on the front of front plate, install the LED light on the front plate.
Connect the terminal of LED light and light leads.
Reinstall the grease filter.
Reinstall LED light module
Max Power Voltage Picture Lamp Cap ILCOS D code
Square / Diameter
: 33.2mm x 120mm
1.5W DC 12 V
——
DSS-1.5-S-33.2
/120
9