EMDEL15SX/BK
CONTENTS Technical specifications …………………………………………………….. Conformity with the standards and Test data …………………………….. 4 4 Safety information and Recommendations………………………………….. • Recycling .......………………………......................................................... • Safety information …………………………………………………………… • Recommendations …...……………………………………………………… • Items not suitable for dishwashing ………………………………………… 5 5 5 8 9 Installing the machine ………………………………………………………….. • Positioning the machine …………………………………………………….
Loading your dishwasher .……………………………………………………. • Top basket…………………………………………………………………... • Lower basket………………………………………………………………... • Alternative basket loads …………………………………………………... 19 19 20 22 Programme descriptions .…………………………………………………….. • Programme items ………………………………………………………….. 24 24 Selection of Program and Starting of the Machine.......……………........ • Selection of Program and Starting of the Machine …………………….
3 9 10 11 1. 2. 3. 4. 5. 6. Worktop Upper basket with racks Upper spray arm Lower basket Lower spray arm Filters 7. 8. 9. 10. 11. Rating plate Control Panel Detergent and rinse-aid dispenser Upper basket track latch Upper Cutlery Basket 8 7 5 6 4 3 2 1 Ceiling Spray Arm: It provides better washing for the dishes at upper basket. 13 Turbo Drying Unit: This system provides better drying performance for your dishes.
Technical specifications Capacity Height Height (without worktop) Width Depth Net Weight Electricity input Total Power Heating Power Pump Power Drain Pump Power Water supply pressure Current 15 place settings 850 mm 820 mm 598 mm 598 mm 50 kg 220-240 V, 50 Hz 1900 W 1800 W 100 W 30 W 0.
SAFETY INFORMATION AND RECOMMENDATIONS Recycling • Certain components and the packaging of your machine have been produced from recyclable materials. • Plastic parts are marked with international abbreviations: (>PE< , >PS< , >POM<, >PP<, ) • Cardboard parts have been produced from recycled paper and they should be disposed of into waste paper collection containers for recycling. • Such materials are not suitable for being disposed of into garbage bins. They should be delivered to recycling centres instead.
• Check whether the indoor electrical fuse system is connected according to the regulations. • All electrical connections must match the values indicated on the rating plate. • Pay special attention and be sure that the machine does not stand on the electricity supply cable. • Never use an extension cord or a multiple socket for making a connection. The plug should be comfortably accessible after the machine has been installed.
WARNING: Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle. • Due to danger of explosion, do not put into the machine’s washing section any chemical dissolving agents such as solvents. • Check whether plastic items are heat-resistant before washing them in the machine.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • If EnergySave option is selected as "Yes", The door will be opened at the end of the program. Do not force to close the door to avoid harm auto door mechanism during 1 minutes. The door must be open during 30 minutes to get effective drying.
Recommendations • For energy and water saving, remove coarse residues on your dishes before placing the dishes into the machine. Start your machine after having fully loaded it. • Use the pre-wash programme only whenever necessary. • Place such hollow items as bowls, glasses and pots into the machine in such a way that they will face down. • You are recommended not to load into your machine any dishes different or more than indicated.
INSTALLING THE MACHINE Positioning the machine When determining the place to put your machine on, take care to choose a place where you can easily load and unload your dishes. Do not put your machine in any location where there is the probability for the room temperature to fall below 0°C. Before positioning, take the machine out of its packaging by following the warnings located on the package. Position the machine close to a water tap or drain.
Water connection Be sure that the indoor plumbing is suitable for installing a dishwasher. Also, we recommend that you fit a filter at the entrance of your place or apartment so as to avoid any damage to your machine because of any contamination (sand, clay, rust etc.) that might be occasionally carried in through the mains water supply or the indoor plumbing, and to forestall such complaints as yellowing and formation of deposits after washing.
Water outlet hose The water drain hose can be connected either directly to the water drain hole or to the sink outlet spigot. Using a special bent pipe (if available), the water can be drained directly into the sink via hooking the bent pipe over the edge of the sink. This connection should be at a minimum of 50 cm and at a maximum of 110 cm from the floor plane. Warning: When a drain hose longer than 4 m is used, the dishes might remain dirty. In that case, our company will not accept responsibility.
Electrical connection The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and current. If there is no earthing installation, have a competent electrician carry out an earthing installation. In case of usage without earthing installed, our company will not be responsible for any loss of usage that might occur. The indoor fuse current value should be 10-16 A. Your machine is set according to 220-240 V.
Fitting the machine undercounter If you wish to fit your machine undercounter, check whether you have sufficient space under your countertop and whether the wiring-plumbing is suitable to do so.1 If you decide that the space under the countertop is suitable for fitting your machine, remove the worktop as shown in the illustration. 2 Warning:The stand part which we will settle our machine under it by removing its worktop has to be stable in such a way not to allow balance disorder.
Adjust the machine feet according to the slope of the floor.3 Fit your machine by pushing it undercounter without letting the hoses get crushed or bent.4 H Height Without Insulation All Product 820 mm Product With Insulation For 2nd Basket For 3rd Basket 830mm 835 mm Warning: After removal of worktop, the machine should be placed in such a closed place of which dimensions are shown at fig.
PREPARING THE MACHINE FOR USE Prior to using the machine for the first time • Check whether the electricity and supply water specifications match the values indicated by the installation instructions for the machine. • Remove all packaging materials inside the machine. • Fill the rinse aid compartment. Detergent usage Use a detergent specifically designed for use in domestic dishwashers. You can find powder,gel,and tablet detergents in the market that have been designed for household dishwashers.
Points to consider when using this type of products: • Always make sure to check the specifications of the product you will use or whether or not it is a combined product. • Check if the detergent used is appropriate for the hardness of mains water that machine is appertaining to. • Observe the instructions on packagings when using such products. • If such detergents are in the form of tablets, never put them into the interior section or the cutlery basket of the dishwasher.
To put rinse aid, remove the rinse aid compartment cap by turning it.1 Fill the rinse aid compartment with rinse aid until the rinse aid level indicator becomes dark;2 refit the cap and close it by turning it in a way that the nails will correspond to one another. By checking the rinse aid level indicator on the detergent dispenser, you can understand whether or not your machine needs rinse aid.
LOADING YOUR DISHWASHER If you properly place your dishes into the machine, you will be using it in the best way in terms of energy consumption, washing and drying performance. There are two separate baskets for you to load your dishes into your machine. You can load into the lower basket such round and deep items as pots with long handles, pot lids, plates, salad plates, cutlery sets. The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and glasses.
Top basket height adjustment while it is full Basket height adjustment mechanism on the top basket of your machine is designed to let you adjust the height of your top basket upwards or downwards, without removing it from your machine when it is full, and create large spaces at the top or bottom area of your machine as needed. Basket of your machine is set to upper position in factory settings. In order to raise your basket, hold it from both sides and pull it upwards.
Upper Cutlery Basket The upper cutlery basket is designed for you to place forks, spoons and knives, long dippers and small items. Because it can easily be taken out of the machine, it allows your dishes to be taken out of the machine along with the basket after washing. The Upper Cutlery Basket is composed of two pieces; if you need to make space for the dishes in the upper basket, you can take out the left or right part of the upper cutlery basket in order to obtain more space. .
Alternative basket loads Lower Basket Top basket 22
Faulty loads Important Note for Test Laboratories For detailed information on performance tests, please contact following address: "dishwasher@standardtest.info” . In your email, please provide the model name and serial number (20 digits) which you can find on the appliance door.
PROGRAM DESCRIPTIONS Program items Referance Program No Prewash Name of Program Washing Temperature Type of Food Fragment Level of Contamination Amount of Detergent B: 25 cm 3 / 15 cm 3 A: 5 cm 3 35° C Fresh less dirty, cofee,milk, tea - *Jet Wash 18' small - Quick 30' Fresh coffee, milk, tea, cold meat, vegetables Prewash 35° C Wash End Hot Rinse Cold Rinse End Hot Rinse 60° C Soups, sauces, pasta, eggs, pilaf, potato and oven dishes, fried foods, kept for long Auto 50°C-60°C 50-60°
Selection of Program and Starting of the Machine 3 4 5 1 6 7 8 2 9 17 11 12 13 14 10 18 15 16 21 19 20 a b c d 21 1-On/Off 2-Door Handle 3-Confirmation Button 4-Option Button 5-Delay Button 6-Start/Pause button 7-Up Selection Button 8-Down Selection Button 9-Extra Hygiene Indicator 10-Tablet Indicator 11-Half Load Indicator 12-Extra Fast Indicator 13-Extra Silent Indicator 14-Extra Drying Indicator 15-Rinse Aid Level Warning Indicator 16-Child Lock Indicator 17-Delay Indicator 18-Remaining
BUTTONS 1 Power On/Off Button When you press the on/off button, the machine is energized and the display shows the last used program; in the off position, the LCD on the display are off. 2 Door Handle Please use the door handle to open-close the door of your machine. 3 Confirmation Button Confirms (saves) your additional functions and settings. 4 Option Button Allows you to use the functions in the additional functions menu.
If you have little amount of dishes in your machine and if you have to wash them, you can also activate the semi-filling function for some programs. If you have dishes in both baskets, select the half load function and select the position in which both images are highlighted. If you have dishes only in the upper basket, select the position in which the upper image is illuminated. Thus, washing up shall be done only on the upper basket of your machine.
Selection of Program and Starting of the Machine 1- Press Power On/Off switch. Note: Select your washing program appropriate for your dishes by the help of the program items page in the user guide. 2- You may select the washing program by using up/down (7,8) selection buttons. Note: You may follow the program time in the time indicator. ( 19 ) 3- If necessary, you may select additional functions by using option button (4).
Program Follow-up You can follow the progress by the help of the program follow-up symbols on the display.( 22 - a,b,c,d). As the washing proceeds, respectively Washing and Drying symbols will be illuminated. When the drying symbol is on, the machine remains silent for about 40-50 minutes. Do not open the door before the completion indicator light is on. When the programme ends, Completion indicator light is illuminated.
Adding Additional Functions to the Program You may change the program according to your preferences by adding additional functions to the washing program.The washing programs have been designed so as to obtain the best cleaning considering the type of smear, amount of smear and properties of the washing materials. The additional functions were developed in order to save time, water and electricity and thus allow you to wash your dishes more conveniently.
In order to add additional functions to the program; 1-Select the appropriate washing program for your dishes using the up/down buttons (7,8) after pressing the option button. 2- Enter the additional functions menu (4) by pressing the option button. After selecting the additional function using up/down buttons (7,8), illuminate the additional function indicators (9-10-11-12-13-14) by pressing the confirmation button. 3- You may start the programme by pressing the Start/Standby button.
Settings Menu In order to enter the Settings Menu, hold the option and delay buttons for 3 seconds. The display will show an expression (“Keep Pressing ..X”) to let you know how many more seconds you have to hold the button. When this number is zero, you will see the Menu settings on the display. You may navigate within the menu by using the selection buttons.
4- Brightness level You may adjust the level of your machine’s display brightness here After entering the menu, select the “4- Brightness” by using the selection buttons. Here you will see “brightness :X” (X:L1,L2,L3 ). L1 is the lowest, L3 is the highest brightness level. select the desired brightness level and save the selection by pressing the confirmation button After pressing the confirmation button, activate “X” and confirmation button once more.
Delayed Start:(Snooze) You may delay the starting time of the selected programme up to 24 hours. You can not make a delay setting after the programme starts. In order for you to be able to make a delay setting, the selected programme needs not to be in operation. 1- Press the delay button (5) 2- Hour “00:00” is displayed on the display information line (19) and the delay symbol (18) starts flashing. 3- You may set the delay time with the selection buttons (7,8) to the desired time.
MAINTENANCE AND CLEANING Cleaning the machine in regular intervals prolongs the machine’s service life. Oil and lime may accumulate in the machine’s washing section. In case of such accumulation -Fill the detergent compartment without loading any dishes into the machine, select a programme that runs at high temperature, and start the machine. In case of insufficiency, use special cleansing material available in the market. (Cleansing material produced special to machines by detergent producers.
Spray arms Check whether or not the holes for the upper and lower spray arms are clogged. If there is any clogging, remove the spray arms and clean them under water. You can remove the lower spray arm by pulling it upwards, while the upper spray arm nut can be removed by turning the nut to the left. Be sure that the nut is perfectly tightened when refitting the upper spray arm.
37 F6 F9 F7 FE F1 F8 F2 F3 F5 ERROR CODE If the error continues, contact the service person. Power off-on your machine and activate the program cancellation command. The filters of your machine might be clogged. Water discharge hose is clogged. Contact the service person. Close the tap. Restart your machine, contact the service person if the error resumes. Close the water input tap, separate the water input hose from the tap and clean the filter at the connection end of the hose.
If one of program monitor lights is on and start/Pause light is on and off Your machine’s door is open, shut the door. If the programme won’t start • Check if the plug is connected. • Check your indoor fuses. • Be sure that the water inlet tap is turned on. • Be sure that you have closed the machine door. • Be sure that you switched off the machine by pressing the Power On / Off button. • Be sure that the water inlet filter and the machine filters are not clogged.
If the dishes won't dry up • A programme without a dry operation selected. • Rinse aid dosage set too low • Dishes unloaded too fast. If there are rust stains on the dishes • Stainless-steel quality of the dishes washed is insufficient. • Unhealthy mains grounding. Call an authorised service if the problem still persists after the controls or in case of any malfunction not described above. PRACTICAL AND USEFUL INFORMATION 1.
Head Office Eurostyle Group Pty Ltd 6 Pattinson Road Newton S.A. 5074 Ph. 1800 440 335 Ph (08) 8165 1012 Fax: (08) 8165 1018 Two Year Warranty On Euro Appliances Warranty Subject to the exclusions and limitations set out below we warrant to you that if you purchase Euro Appliances from one of our authorised retailers that they will not contain defects as a result of faulty manufacturer workmanship or materials.
