---cooking USE AND CARE GUIDE MODELNO. EMIN110B EMBRACE EUROPEAN QUALITY+PASSION www. eu roappli a nces.com .
Dear Customer Thank you for purchasing a Eurostyle Cooktop. Before we continue telling you about this cooktop, we cordially invite you to become part of the Eurostyle family by subscribing to ongoing information and invitations. You will find that the clean lines and modern look of your Eurostyle Cooktop blends perfectly with your kitchen décor. It is easy to use and performs to a high standard. There are models to complement your new Eurostyle Cooktop.
COOKING AREA TYPE: PCZ VTCI Model: EMIN110B The appliance has 4 cooking areas with different sizes and different power levels. The heating elements are of the magnetic induction type, which come on after selecting the heating element, and the heat can be regulated using the controls on the front panel, from a minimum of 1 to a maximum of 9 (depending on the models). There is also a fast boiling function (booster) indicated by the letter P on the display.
Guide to Using the Instructions Booklet Safety instructions cerning use of the appliance by a person responsible for their safety. User cleaning and maintenance may not be done by unsupervised children. Before first use, you should carefully read the installation and connection instructions. For your safety, installation should be carried out by an authorised technician and should comply with existing installation standards.
Connecting the electricity ovens, due to the high temperature reached by this appliance. The electric connection is made via an omnipolar switch or plug where accessible, which is suitable for the intensity to be tolerated and which has a minimum gap of 3 mm between its contacts, which will ensure disconnection in case of emergency or when cleaning the hob. When finished, turn off the cooking zone by using the touch controls.
Installation INSTALLATION AND SETUP SHOULD BE CARRIED OUT BY AN AUTHORISED TECHNICIAN IN LINE WITH CURRENT INSTALLATION STANDARDS AND THE MANUFACTURER'S INSTRUCTIONS. The glues used in manufacturing the kitchen unit and in the adhesive on the decorative laminate of the worktop surface should be made to tolerate temperatures of up to 100 ºC. Positioning the hob Manufacturer assumes no responsibility for any malfunction or damage caused by faulty installation.
Minimum ventilation distances Minimum ventilation distances fig. 1 Fitting holes fig. 3 Minimum distance to wall fig.
Model: EMIN110B 1 On/off touch key. 13 “More” sensor for timer. 2 Hotplate indicators. 3 Plate selection sensors and 14 Activation sensor for boil control function. 15 Activation sensor for heat power indicators. 4 Decimal point. 5 Timer indicators. sustainment function. 16 Total zone function sensor. 6 Cursor slider for controlling power. 7 Direct access to power function. 8 Activaction sensor for block function. 17 Activation sensor for stop function.
Installation Only the official technical service can handle or repair the appliance, including replacement of the power cable. Installation with cutlery drawer If you wish to install furniture or a cutlery drawer under the hob, a separation board must be fitted between the two. Accidental contact with the hot surface of the device's housing is thus prevented. The board must be fitted 20 mm beneath the under part of the stovetop.
Use and maintenance User instructions of the Touch Control Operations are carried out by using the sensors marked on the control panel. It's not necessary to push hard on the glass. Simply place your finger on the sensor to activate the desired function. Use the cursor slider (6) to adjust power levels (0 - 9, and P) by sliding your finger over it. Sliding towards the right increases the value, whereas sliding towards the left decreases it.
When finished, turn off the cooking zone by using the touch controls. Otherwise an undesired operation could occur if a pan is accidentally placed on the cooking zone during the next three minutes. Avoid possible accidents! Blocking cooktop sensors To activate it, select the plate. The decimal point will light up. Then push sensor (15). The symbol "A" will appear in the indicator and the corresponding pilot (11) will turn on.
Table 1 Power selected WARNING: do not use this function for cooking methods other than boiling water. Never use oil. It can overheat and create flames. 0 Activating the function: Deactivating the function You can cancel the function at any time by simply turning off the plate or modifying the power level. Safety shut off If due to an error one or several heating zones do not switch off, the appliance will be automatically disconnected after a set amount of time (see table 1).
Once the countdown has finished, the timed plate will turn off and a series of beeps will be heard. They can be stopped by touching either of the sensors (12) or (13) associated with the clock. Disconnecting the clock If you wish to stop the clock before the programmed time is up, this can be done at any time by simply adjusting its value to '--'. 1 Select the plate you wish to stop the timer on by directly touching its corresponding indicator (3).
Suggestions and recommendations * Use pots or pans with thick, completely flat bottoms. * Pots/pans with a smaller diameter than the shown heating area are not recommended. * Do not slide pots and pans over the glass because they could scratch it. * Although the glass can take knocks from large pots and pans without sharp edges, try not to knock it. * To avoid damaging the ceramic glass surface, do not drag pots and pans over the glass and keep the undersides of them clean and in good condition.
Environmental considerations The symbol on the product or its packaging means that this product cannot be treated like ordinary household waste. This product must be taken to a recycling collection point for electrical and electronic appliances. By ensuring that this product is disposed of correctly, you will avoid harming the environment and public health, which could happen if this product is not handled properly.
If something does not work Before calling the technical service, perform the verifications described below. The appliance does not work: Ensure that the power cable is plugged in. possible cause: the induction zones have a fan to keep the electronics cool. The induction zones do not produce heat: possible cause: the container is not appropriate (it does not have a ferromagnetic bottom or is too small).
The hob (or any of the hotplates) powers off during cooking and the messages C81 or C82 appears. Possible cause: there is a container, cloth or liquid covering the Touch Control. Possible solution: remove any object that might be covering the Touch Control. Possible cause: one or several of the hotplates has overheated. Possible solution: allow the overheated hotplates to cool down for a few minutes before powering them up again.
ERROR CODE LIST FOR INDUCTION HOBS
TECHNICAL ASSISTANCE AND SPARES Before leaving the factory, this appliance was tested and regulated by specially qualified experts in order to guarantee the best operating results. The original spare parts can be found only in our Technical Assistance Centres and authorised shops. Every repair or regulation operation which should become subsequently necessary must be carried out with the utmost care and attention by qualified personnel.
