User Manual

Installation
9
Installation with cutlery drawer
If you wish to install furniture or a cutlery drawer
under the hob, a separation board must be fitted
between the two. Accidental contact with the hot
surface of the device's housing is thus preven-
ted.
The board must be fitted 20 mm beneath the
under part of the stovetop.
Electrical connection
Before you connect the stovetop to the mains,
check that the voltage and frequency match
those specified on the stovetop nameplate,
which is under-neath it, and on the Guarantee
Sheet, or if applicable on the technical data
sheet, which you must keep together with this
manual throughout the product's service life.
The electrical connection will be via an all-
pole circuit breaker or plug, whenever acces-
sible, in accordance with the current and
with a minimum 3 mm distance between con-
tacts. This ensures disconnection in emer-
gencies and allows stovetop cleaning.
Ensure that the inlet cable does not come
into contact with the induction top housing
or the oven housing, if it is installed in the
same unit.
Warning:
The electrical connection must be pro-
perly grounded, following current legisla-
tion, otherwise the induction hob may mal-
function.
Unusually high power surges can
damage the control system (like with any
electrical appliance).
It is advised to refrain from using the
induction hob during the pyrolytic cleaning
function in the case of pyrolytic ovens, due
to the high temperature that this type of devi-
ce attains.
Only the official technical service can
handle or repair the appliance, including
replacement of the power cable.
Before disconnecting the hob from the
mains, we recommend switching off the cut-
off switch and waiting for approximately 25
seconds before pulling the plug. This time is
required to allow for the complete discharge
of the electronic circuitry and thus preclude
the possibility of electric shock from the
contacts of the plug.
Keep the Guarantee Certificate or the
technical data sheet together with the ins-
tructions manual throughout the product's
service life. These contain important techni-
cal information.
Ensure the appliance is installed by
an authorised person in accordance
with AS/NZS 3000 wiring rules.