Specifications

Code
DC
Voltage
Current
(continuous)
ST-2406-2A
ST-2406-3A
ST-2406-5A
ST-2406-7A
Current
(peak)
6, 12, 24
6, 12, 24
6, 12, 24
6, 12, 24
1.5A
2.5A
4.0A
7.0A
2.0A
3.0A
5.0A
7.5A
• Regulated and filtered output voltage
• Short circuit protection
• Built-in backup battery charger
• Switches to backup battery
auto matically in the event of power loss
• Fused protection for battery charger
• Input AC Voltage required for 6VDC (12VAC),
12VDC (16VAC), 24VDC (24-28VAC)
• Transformer selection P = V x I (for 2A @
16VAC = 2x16 = 32VA) use 40VA standard VA
• Transformer excluded (see page 65)
Code
SA-025
Relay Contact Ratings
Supply Voltage
8A @ 120VAC/24VDC
12/24VDC (auto sensing)
• Timer can be set from 1 second to
60 minutes
• Positive or negative trigger on
power-up
• Relay can be programmed to
activate at the start or at the end of
the timing cycle
• Relay can also be set to activate for
one second at the end of the timing
cycle
• Programmable for pulse (flash) or
steady on
• Reset function for manual reset of
timing cycle
• LED indicates relay is energised
Code Description
RF TRANSMITTERS
SK-919TP1H-B
SK-919TP2H-N
SK-919TP4H-N
SK-94BC
AC513
• Operates up to 160m (500ft)
• Over 68 billion codes possible
• Includes visor and belt clip
• Includes 2 x 3VDC lithium batteries
• Frequency 433.92MHz
1-Button Transmitter fixed code
2-Button Transmitter fixed code
4-Button Transmitter fixed code
Belt clip holster or wall mount bracket
Spare battery (CR2016)
Code Description
SK-919TP2D-P
SK-919TP2D-F
• RF remote controlled activation of locks, cameras or other devices from
the convenience of a desk or other location.
• Operates up to 160m (500ft)
• Attractive heavy-duty aluminium case
• LED indication for transmission, low battery and charging
• Frequency 433.92Mz
• Works with receivers below type SK910R2-4
• Rechargeable 9V battery and power supply included
2-Button Desktop RF Transmitter (2 Channel)
2-Button Foot RF Transmitter (2 Channel)
Features
Features
WIRED & WIRELESS RF TRANSMITTERS & RECEIVERS
• Powered by internal or external
battery
• Operates up to 170M
• Over 68 billion possible codes
• LED transmission indicator
• Includes 12VDC alkaline battery
• Wiring:
– 2 wires (200mm) for N.O. switch
input
– 2 wires (200mm) for 12VDC power
input
• Frequency: 433.92MHz
Typical Applications
SK-939TDWS-B
SK-919TP2D-P
SK-9HBC
SK-919TP2D-F
1 & 2 Channel
Transmitter
SK-939TS1S 1 Ch
SK-939TS2S 2 Ch
Make push-button wireless
SK-910R
RF Receiver
E-941SA-1200
Electromagnetic Lock
Convert Sensors into entry alarm system
E-960-D90
SK-919TDWS-B
Push Button
Wireless equipment/perimeter security
Receiver Dipole Antenna for Extended Range
SK910R-4 1 Channel
SK910R2-4 2 Channel
SK910R4 4 Channel
Extended range up to 200m for
SK910R/R2/R4
SK-910R
RF Receiver
Wired Transmitter
• Operates up to 170M
• Over 68 billion possible codes
• LED transmission indicator
• Includes 12VDC alkaline battery
Frequency: 433.92MHz
Plugs into Board Connector on Receiver
Code
SK-93ERSD
Code Description
See page 543
38
SEC
SERIES POWER SUPPLY/CHARGERS MULTI-FUNCTION TIMER MODULE